Re: [flashrom] PCCHIPS M863G V5.1A + Winbond W49V002AP - Write OK

[Stefan Tauner]

On Sun, 3 Jul 2011 11:11:16 -0300
Marcos Felipe Rasia de Mello  wrote:
> 2011/7/3 Stefan Tauner
> > hello and thanks for your report!
> > i have added the board to our supported hw list and marked the W49V002A
> > as fully tested and will commit that later.
>
> You are welcome.
> When should I send "lspci -nnvvxxx" output? Is only "flashrom -V"
> output sufficient?

well, i would say for all reports that do not involve board enables
(i.e. if there is no ""Disabling flash write protection for board" in
the output), then flashrom -V is enough.
but having the associated lspci data does not hurt (us) at all...