[flashrom] [PATCH] Print supported flash chips as narrow as possible

[Carl-Daniel Hailfinger]

Print supported flash chips as narrow as possible.
Fix a bug where 4 GB of spaces would be printed per line if a vendor
name was longer than 10 chars.

This patch (or a smaller version) is needed to commit MoselVitelic chip
support.

Signed-off-by: Carl-Daniel Hailfinger

Index: flashrom-chiplist_narrow/print.c
===================================================================
--- flashrom-chiplist_narrow/print.c	(Revision 1087)
+++ flashrom-chiplist_narrow/print.c	(Arbeitskopie)
@@ -76,26 +76,33 @@
 static void print_supported_chips(void)
 {
    int okcol = 0, pos = 0, i, chipcount = 0;
+	int maxchiplen = 0, maxvendorlen = 0;
    struct flashchip *f;

for (f = flashchips; f->name != NULL; f++) {
-		if (GENERIC_DEVICE_ID == f->model_id)
+		/* Ignore "unknown XXXX SPI chip" entries. */
+		if (!strncmp(f->name, "unknown", 7))
    		continue;
-		okcol = max(okcol, strlen(f->vendor) + 1 + strlen(f->name));
+		chipcount++;
+		maxvendorlen = max(maxvendorlen, strlen(f->vendor));
+		maxchiplen = max(maxchiplen, strlen(f->name));
    }
-	okcol = (okcol + 7) & ~7;
+	maxvendorlen++;
+	maxchiplen++;
+	okcol = maxvendorlen + maxchiplen;

-	for (f = flashchips; f->name != NULL; f++)
-		chipcount++;
-
    printf("\nSupported flash chips (total: %d):\n\n", chipcount);
-	POS_PRINT("Vendor:   Device:");
-	while (pos < okcol) {
-		printf("\t");
-		pos += 8 - (pos % 8);
-	}
+	printf("Vendor");
+	for (i = strlen("Vendor"); i < maxvendorlen; i++)
+		printf(" ");
+	printf("Device");
+	for (i = strlen("Device"); i < maxchiplen; i++)
+		printf(" ");

-	printf("Tested OK:\tKnown BAD:  Size/KB:  Type:\n\n");
+	printf("Tested   Known    Size/KB:  Type:\n");
+	for (i = 0; i < okcol; i++)
+		printf(" ");
+	printf("OK       Broken\n\n");
    printf("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n");

for (f = flashchips; f->name != NULL; f++) {
@@ -104,15 +111,13 @@
    		continue;

printf("%s", f->vendor);
-		for (i = 0; i < 10 - strlen(f->vendor); i++)
+		for (i = strlen(f->vendor); i < maxvendorlen; i++)
    		printf(" ");
    	printf("%s", f->name);
+		for (i = strlen(f->name); i < maxchiplen; i++)
+			printf(" ");

-		pos = 10 + strlen(f->name);
-		while (pos < okcol) {
-			printf("\t");
-			pos += 8 - (pos % 8);
-		}
+		pos = maxvendorlen + maxchiplen;
    	if ((f->tested & TEST_OK_MASK)) {
    		if ((f->tested & TEST_OK_PROBE))
    			POS_PRINT("P ");
@@ -124,21 +129,25 @@
    			POS_PRINT("W ");
    	}
    	while (pos < okcol + 9) {
-			printf("\t");
-			pos += 8 - (pos % 8);
+			printf(" ");
+			pos++;
    	}
    	if ((f->tested & TEST_BAD_MASK)) {
    		if ((f->tested & TEST_BAD_PROBE))
-				printf("P ");
+				POS_PRINT("P ");
    		if ((f->tested & TEST_BAD_READ))
-				printf("R ");
+				POS_PRINT("R ");
    		if ((f->tested & TEST_BAD_ERASE))
-				printf("E ");
+				POS_PRINT("E ");
    		if ((f->tested & TEST_BAD_WRITE))
-				printf("W ");
+				POS_PRINT("W ");
    	}

-		printf("\t    %d", f->total_size);
+		while (pos < okcol + 18) {
+			printf(" ");
+			pos++;
+		}
+		printf("%d", f->total_size);
    	for (i = 0; i < 10 - digits(f->total_size); i++)
    		printf(" ");
    	printf("%s\n", flashbuses_to_text(f->bustype));