Author: stefanct Date: Thu Feb 16 21:55:27 2012 New Revision: 1497 URL: http://flashrom.org/trac/flashrom/changeset/1497
Log: Manpage improvements.
The sections describing the various options of the internal and dummy programmers have grown out of proportions. This patch adds some headlines to devide the unrelated topics a bit (with .TP commands). The previous indented paragraphs for the various programmers were transformed to subsections (.SS).
Also, rephrase the documention related to laptops completely to make it less redundant and more informative. Document the laptop=this_is_not_a_laptop internal programmer parameter
Change the contact info in the bugs section by removing the trac reference and adding IRC (and the pastebin) instead.
Remove some superfluous white space and a .RE (restore indentation) command.
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Modified: trunk/flashrom.8
Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Thu Feb 16 21:31:25 2012 (r1496) +++ trunk/flashrom.8 Thu Feb 16 21:55:27 2012 (r1497) @@ -1,4 +1,4 @@ -.TH FLASHROM 8 "Jul 25, 2011" +.TH FLASHROM 8 "Feb 15, 2012" .SH NAME flashrom - detect, read, write, verify and erase flash chips .SH SYNOPSIS @@ -223,8 +223,11 @@ colon. While some programmers take arguments at fixed positions, other programmers use a key/value interface in which the key and value is separated by an equal sign and different pairs are separated by a comma or a colon. -.TP +.SS .BR "internal " programmer +.TP +.B Board Enables +.sp Some mainboards require to run mainboard specific code to enable flash erase and write support (and probe support on old systems with parallel flash). The mainboard brand and model (if it requires specific code) is usually @@ -275,17 +278,22 @@ enable is going to fail. In any case (success or failure), please report to the flashrom mailing list, see below. .sp +.TP +.B Coreboot +.sp On systems running coreboot, flashrom checks whether the desired image matches your mainboard. This needs some special board ID to be present in the image. If flashrom detects that the image you want to write and the current board do not match, it will refuse to write the image unless you specify .sp .B " flashrom -p internal:boardmismatch=force" +.TP +.B ITE IT87 Super I/O .sp If your mainboard uses an ITE IT87 series Super I/O for LPC<->SPI flash bus translation, flashrom should autodetect that configuration. If you want to set the I/O base port of the IT87 series SPI controller manually instead of -using the value provided by the BIOS, use the +using the value provided by the BIOS, use the .sp .B " flashrom -p internal:it87spiport=portnum" .sp @@ -295,6 +303,9 @@ flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug report so we can diagnose the problem. .sp +.TP +.B Intel chipsets +.sp If you have an Intel chipset with an ICH8 or later southbridge with SPI flash attached, and if a valid descriptor was written to it (e.g. by the vendor), the chipset provides an alternative way to access the flash chip(s) named @@ -346,6 +357,8 @@ .sp Example: .B "flashrom -p internal:fwh_idsel=0x001122334567" +.TP +.B Laptops .sp Using flashrom on laptops is dangerous and may easily make your hardware unusable (see also the @@ -353,21 +366,31 @@ section). The embedded controller (EC) in these machines often interacts badly with flashing. .B http://www.flashrom.org/Laptops -has more information. If flash is shared with the EC, erase is guaranteed to -brick your laptop and write is very likely to brick your laptop. -Chip read and probe may irritate your EC and cause fan failure, backlight -failure, sudden poweroff, and other nasty effects. -flashrom will attempt to detect laptops and abort immediately for safety -reasons. -If you want to proceed anyway at your own risk, use +has more information. For example the EC firmware sometimes resides on the same +flash chip as the host firmware. While flashrom tries to change the contents of +that memory the EC might need to fetch new instructions or data from it and +could stop working correctly. Probing for and reading from the chip may also +irritate your EC and cause fan failure, backlight failure, sudden poweroff, and +other nasty effects. flashrom will attempt to detect if it is running on a +laptop and abort immediately for safety reasons if it clearly identifies the +host computer as one. If you want to proceed anyway at your own risk, use .sp .B " flashrom -p internal:laptop=force_I_want_a_brick" .sp -You have been warned. -.sp We will not help you if you force flashing on a laptop because this is a really dumb idea. -.TP +.sp +You have been warned. +.sp +Currently we rely on the chassis type encoded in the DMI/SMBIOS data to detect +laptops. Some vendors did not implement those bits correctly or set them to +generic and/or dummy values. flashrom will then issue a warning and bail out +like above. In this case you can use +.sp +.B " flashrom -p internal:laptop=this_is_not_a_laptop" +.sp +to tell flashrom (at your own risk) that it does not running on a laptop. +.SS .BR "dummy " programmer The dummy programmer operates on a buffer in memory only. It provides a safe and fast way to test various aspects of flashrom and is mainly used in @@ -409,6 +432,8 @@ .sp Example: .B "flashrom -p dummy:emulate=SST25VF040.REMS" +.TP +.B Persistent images .sp If you use flash chip emulation, flash image persistence is available as well by using the @@ -422,6 +447,8 @@ .sp Example: .B "flashrom -p dummy:emulate=M25P10.RES,image=dummy.bin" +.TP +.B SPI write chunk size .sp If you use SPI flash chip emulation for a chip which supports SPI page write with the default opcode, you can set the maximum allowed write chunk size with @@ -436,6 +463,8 @@ Example: .sp .B " flashrom -p dummy:emulate=M25P10.RES,spi_write_256_chunksize=5" +.TP +.B SPI blacklist .sp To simulate a programmer which refuses to send certain SPI commands to the flash chip, you can specify a blacklist of SPI commands with the @@ -448,6 +477,9 @@ commandlist may be up to 512 characters (256 commands) long. Implementation note: flashrom will detect an error during command execution. .sp +.TP +.B SPI ignorelist +.sp To simulate a flash chip which ignores (doesn't support) certain SPI commands, you can specify an ignorelist of SPI commands with the .sp @@ -458,7 +490,7 @@ command 0x03 (READ) and command 0x02 (WRITE). commandlist may be up to 512 characters (256 commands) long. Implementation note: flashrom won't detect an error during command execution. -.TP +.SS .BR "nic3com" , " nicrealtek" , " nicsmc1211" , " nicnatsemi" , " nicintel\ " , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii\ " , " satamv" ", and " atahpt " programmers @@ -480,7 +512,7 @@ .sp Example: .B "flashrom -p nic3com:pci=05:04.0" -.TP +.SS .BR "ft2232_spi " programmer An optional parameter specifies the controller type and interface/port it should support. For that you have to use the @@ -501,7 +533,7 @@ .B 4232H and the default interface is .BR B . -.TP +.SS .BR "serprog " programmer A mandatory parameter specifies either a serial device/baud combination or an IP/port combination for communication with the @@ -517,7 +549,7 @@ instead. More information about serprog is available in .B serprog-protocol.txt in the source distribution. -.TP +.SS .BR "buspirate_spi " programmer A required .B dev @@ -533,7 +565,7 @@ can be .BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M " or " 8M (in Hz). The default is the maximum frequency of 8 MHz. -.TP +.SS .BR "dediprog " programmer An optional .B voltage @@ -549,7 +581,7 @@ can be .BR 0V ", " 1.8V ", " 2.5V ", " 3.5V or the equivalent in mV. -.TP +.SS .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use the optional @@ -579,9 +611,9 @@ .BR "http://rayer.ic.cz/elektro/spipgm.htm " . The schematic of the Xilinx DLC 5 was published at .BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " . -.TP +.SS .BR "ogp_spi " programmer -The flash ROM chip to access must be specified with the +The flash ROM chip to access must be specified with the .B rom parameter. .sp @@ -665,25 +697,37 @@ .B "/etc/rc.securelevel" and rebooting, or rebooting into single user mode. .SH BUGS -Please report any bugs at -.sp -.B " http://www.flashrom.org/trac/flashrom/newticket" -.sp -or on the flashrom mailing list at +Please report any bugs to the flashrom mailing list at .B "flashrom@flashrom.org" .sp We recommend to subscribe first at .sp .B " http://www.flashrom.org/mailman/listinfo/flashrom" .sp -Using flashrom on laptops is dangerous and may easily make your hardware -unusable unless you can desolder the flash chip and have a full flash chip -backup. This is caused by the embedded controller (EC) present in many laptops, -which interacts badly with any flash attempts. This is a hardware limitation -and flashrom will attempt to detect it and abort immediately for safety reasons. -.sp -More information about flashrom on laptops is available from +Many of the developers communicate via the +.B "#flashrom" +IRC channel on +.BR chat.freenode.net . +You are welcome to join and ask questions, send us bug and success reports there +too. Please provide a way to contact you later (e.g. a mail address) and be +patient if there is no immediate reaction. Also, we provide a pastebin service +at +.B http://paste.flashrom.org +that is very useful when you want to share logs etc. without spamming the +channel. +.SS +.B Laptops .sp +Using flashrom on laptops is dangerous and may easily make your hardware +unusable. flashrom will attempt to detect if it is running on a laptop and abort +immediately for safety reasons. Please see the detailed discussion of this topic +and associated flashrom options in the +.B Laptops +paragraph in the +.B internal programmer +subsection of the +.B PROGRAMMER SPECIFIC INFO +section. .B " http://www.flashrom.org/Laptops" .SS One-time programmable (OTP) memory and unique IDs @@ -697,7 +741,6 @@ .sp Similar to OTP memories are unique, factory programmed, unforgeable IDs. They are not modifiable by the user at all. -.RE .SH LICENSE .B flashrom is covered by the GNU General Public License (GPL), version 2. Some files are