./flashrom -V -p internal flashrom v0.9.8-unknown on Linux 4.2.8 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian Command line (3 args): ./flashrom -V -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 745M loops per second, 10 myus = 10 us, 100 myus = 109 us, 1000 myus = 1009 us, 10000 myus = 10020 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Other" DMI chassis-type is not specific enough. DMI string system-manufacturer: "Default string" DMI string system-product-name: "Default string" DMI string system-version: "Default string" DMI string baseboard-manufacturer: "AMI Corporation" DMI string baseboard-product-name: "Aptio CRB" DMI string baseboard-version: "Default string" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85. Please send the output of "flashrom -V -p internal" to flashrom@flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE EC, ID 0x8528, Rev 0x0a on port 0x2e. ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure.
Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details.
If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed. [/share/Public] #