Author: hailfinger Date: Sat Feb 20 23:28:16 2016 New Revision: 1936 URL: http://flashrom.org/trac/flashrom/changeset/1936
Log: Allow global disable of all drivers requiring libusb* or libpci
This is especially helpful for compile tests with CONFIG_EVERYTHING=yes, but can also be used without CONFIG_EVERYTHING.
Usage: make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net Acked-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at
Modified: trunk/Makefile
Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Sat Feb 20 23:04:39 2016 (r1935) +++ trunk/Makefile Sat Feb 20 23:28:16 2016 (r1936) @@ -542,6 +542,33 @@ $(eval $(var)=yes))) endif
+# Disable feature groups +ifeq ($(CONFIG_ENABLE_LIBUSB0_PROGRAMMERS), no) +override CONFIG_PICKIT2_SPI = no +endif +ifeq ($(CONFIG_ENABLE_LIBUSB1_PROGRAMMERS), no) +override CONFIG_CH341A_SPI = no +override CONFIG_DEDIPROG = no +endif +ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no) +override CONFIG_INTERNAL = no +override CONFIG_NIC3COM = no +override CONFIG_GFXNVIDIA = no +override CONFIG_SATASII = no +override CONFIG_ATAHPT = no +override CONFIG_ATAVIA = no +override CONFIG_ATAPROMISE = no +override CONFIG_IT8212 = no +override CONFIG_DRKAISER = no +override CONFIG_NICREALTEK = no +override CONFIG_NICNATSEMI = no +override CONFIG_NICINTEL = no +override CONFIG_NICINTEL_SPI = no +override CONFIG_NICINTEL_EEPROM = no +override CONFIG_OGP_SPI = no +override CONFIG_SATAMV = no +endif + # Bitbanging SPI infrastructure, default off unless needed. ifeq ($(CONFIG_RAYER_SPI), yes) override CONFIG_BITBANG_SPI = yes @@ -1018,7 +1045,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libpci: $(NEED_LIBPCI)."; \ - echo "Please install libpci headers."; \ + echo "Please install libpci headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE) @@ -1036,7 +1064,8 @@ $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \ echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo; \ echo "The following features require libpci: $(NEED_LIBPCI)."; \ - echo "Please install libpci (package pciutils) and/or libz."; \ + echo "Please install libpci (package pciutils) and/or libz or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) @@ -1048,7 +1077,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \ - echo "Please install libusb-0.1 headers or libusb-compat headers."; \ + echo "Please install libusb-0.1 headers or libusb-compat headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking if libusb-0.1 is usable... " | tee -a $(BUILD_DETAILS_FILE) @@ -1056,7 +1086,8 @@ @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >&2 && \ echo "yes." || { echo "no."; \ echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \ - echo "Please install libusb-0.1 or libusb-compat."; \ + echo "Please install libusb-0.1 or libusb-compat or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) @@ -1068,7 +1099,8 @@ @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ echo "found." || { echo "not found."; echo; \ echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \ - echo "Please install libusb-1.0 headers."; \ + echo "Please install libusb-1.0 headers or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @printf "Checking if libusb-1.0 is usable... " | tee -a $(BUILD_DETAILS_FILE) @@ -1076,7 +1108,8 @@ @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS) >&2 && \ echo "yes." || { echo "no."; \ echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \ - echo "Please install libusb-1.0."; \ + echo "Please install libusb-1.0 or disable all features"; \ + echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \ echo "See README for more information."; echo; \ rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX)