Re: [flashrom] flashrom error code message

[David Hendricks]

Hello,
I've seen this issue in cases where the voltage is not set correctly.

What programmer are you using? A verbose log will also help.

On Mon, Oct 15, 2018 at 11:28 PM MIAN VEREST  wrote:
> Recently i start to use flashrom software, moreless in a winbond chip i
> receive this message, is probably IC could be damage?
>
> Waiting for your comments.
>
> thanks in advance.
>
> Erasing and writing flash chip... Erase/write done in 8 min and 26 sec.
> Verifying flash... FAILED at 0x00016650! Expected=0x3f, Found=0x3d, failed
> byte count from 0x00000000-0x007fffff: 0x2
> Your flash chip is in an unknown state.
>
> flashrom mailing list
> [e-mail]
> https://mail.coreboot.org/mailman/listinfo/flashrom