Author: stefanct Date: Sun Jun 9 16:00:46 2013 New Revision: 1677 URL: http://flashrom.org/trac/flashrom/changeset/1677
Log: Add W25Q...W series.
- Use ".V" (and "_V" in macros) for 3.3V Winbond 25Q chips. Rename the existing chips and add a .voltage entry where it was missing. - Use ".W" (and "_W" in macros) for 1.8V Winbond 25Q chips. - Add W25Q20.W, W25Q40.W, W25Q80.W, W25Q16.W, W25Q32.W, W25Q64.W. Based on chromiumos' 469707f0d9b7d81b6c6bb2cace13f09db70f4382 http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=comm...
Signed-off-by: Yung-Chieh Lo yjlou%chromium.org@gtempaccount.com Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Acked-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at
Modified: trunk/flashchips.c trunk/flashchips.h
Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sat Jun 1 02:30:31 2013 (r1676) +++ trunk/flashchips.c Sun Jun 9 16:00:46 2013 (r1677) @@ -10007,13 +10007,14 @@
{ .vendor = "Winbond", - .name = "W25Q80", + .name = "W25Q80.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80, + .model_id = WINBOND_NEX_W25Q80_V, .total_size = 1024, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -10046,13 +10047,14 @@
{ .vendor = "Winbond", - .name = "W25Q16", + .name = "W25Q16.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16, + .model_id = WINBOND_NEX_W25Q16_V, .total_size = 2048, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -10085,13 +10087,14 @@
{ .vendor = "Winbond", - .name = "W25Q32", + .name = "W25Q32.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32, + .model_id = WINBOND_NEX_W25Q32_V, .total_size = 4096, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -10124,13 +10127,14 @@
{ .vendor = "Winbond", - .name = "W25Q64", + .name = "W25Q64.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64, + .model_id = WINBOND_NEX_W25Q64_V, .total_size = 8192, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, @@ -10158,17 +10162,19 @@ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, },
{ .vendor = "Winbond", - .name = "W25Q128", + .name = "W25Q128.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128, + .model_id = WINBOND_NEX_W25Q128_V, .total_size = 16384, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ + /* supports SFDP */ + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, @@ -10196,6 +10202,244 @@ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", + .name = "W25Q20.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q20_W, + .total_size = 256, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q40.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q40_W, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q80.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q80_W, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q16.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q16_W, + .total_size = 2048, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q32.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q32_W, + .total_size = 4096, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ + }, + + { + .vendor = "Winbond", + .name = "W25Q64.W", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q64_W, + .total_size = 8192, + .page_size = 256, + /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 256} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ },
{
Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sat Jun 1 02:30:31 2013 (r1676) +++ trunk/flashchips.h Sun Jun 9 16:00:46 2013 (r1677) @@ -655,12 +655,20 @@ #define WINBOND_NEX_W25X16 0x3015 #define WINBOND_NEX_W25X32 0x3016 #define WINBOND_NEX_W25X64 0x3017 -#define WINBOND_NEX_W25Q40 0x4013 -#define WINBOND_NEX_W25Q80 0x4014 -#define WINBOND_NEX_W25Q16 0x4015 -#define WINBOND_NEX_W25Q32 0x4016 -#define WINBOND_NEX_W25Q64 0x4017 -#define WINBOND_NEX_W25Q128 0x4018 +#define WINBOND_NEX_W25Q40_V 0x4013 /* W25Q40BV; W25Q40BL (2.3-3.6V) */ +#define WINBOND_NEX_W25Q80_V 0x4014 /* W25Q80BV */ +#define WINBOND_NEX_W25Q16_V 0x4015 /* W25Q16CV; W25Q16DV */ +#define WINBOND_NEX_W25Q32_V 0x4016 /* W25Q32BV; W25Q32FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q64_V 0x4017 /* W25Q64BV, W25Q64CV; W25Q64FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q128_V 0x4018 /* W25Q128BV; W25Q128FV in SPI mode (default) */ +#define WINBOND_NEX_W25Q256_V 0x4019 /* W25Q256FV */ +#define WINBOND_NEX_W25Q20_W 0x5012 /* W25Q20BW */ +#define WINBOND_NEX_W25Q40_W 0x5013 /* W25Q40BW */ +#define WINBOND_NEX_W25Q80_W 0x5014 /* W25Q80BW */ +#define WINBOND_NEX_W25Q16_W 0x6015 /* W25Q16DW */ +#define WINBOND_NEX_W25Q32_W 0x6016 /* W25Q32DW; W25Q32FV in QPI mode */ +#define WINBOND_NEX_W25Q64_W 0x6017 /* W25Q64DW; W25Q64FV in QPI mode */ +#define WINBOND_NEX_W25Q128_W 0x6018 /* (No W version known) W25Q128FV in QPI mode */
#define WINBOND_ID 0xDA /* Winbond */ #define WINBOND_W19B160BB 0x49