Re: [flashrom] [PATCH] Fix Winbond W25X{10, 20, 40, 80} incorrect erase blocks

[David Hendricks]

Okay, so I applied the same changes to the W25x16 and got good results. It
looks like the same applies to the W25x{16,32,64} products in addition to
the W25x{10,20,40,80}. Please update the patch to include the additional
chips.

W25x{16,32,64} datasheet:
http://www.winbond-usa.com/products/Nexflash/pdfs/datasheets/W25X16_32_64h.p...

On Thu, Feb 11, 2010 at 3:56 PM, David Hendricks wrote:
> D'oh! I just realized that this patch doesn't affect the x16. I really
> ought to read the patch more carefully...
>
> On Thu, Feb 11, 2010 at 3:50 PM, David Hendricks wrote:
> > On Sun, Jan 31, 2010 at 6:31 PM, Sean Nelson wrote:
> > > Fix erase blocks for Winbond W25X* SPI chips. The Winbond W25X10 and
> > > related chips only have 4k and 64k blocks and only accept erase commands:
> > > 20h, d8h, and c7h.
> > >
> > > Signed-off-by: Sean Nelson
> >
> > Tested on a W25x16 flash chip using an NM10 southbridge. Verbose flashrom
> > -E log attached. Following an erase with a read, the image produced turns up
> > all 0xFF bytes. The warnings reported seem benign, and probably have more to
> > do with the NM10 than the flash chip...
> >
> > Acked by: David Hendricks