On Sat, 10 Mar 2012 21:10:06 +0100 Kim Johansson kbkj@telia.com wrote:
flashrom v0.9.5.2-r1516 on Linux 2.6.35 (i686), built with libpci 2.2.10, GCC 4.2.4, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1276M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1271M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1279M loops per second, delay more than 10% too short (got 85% of expected delay), recalculating... 1296M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 1280M loops per second, 10 myus = 8 us, 100 myus = 85 us, 1000 myus = 929 us, 10000 myus = 16865 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD" DMI string system-product-name: "MS-7597" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO.,LTD" DMI string baseboard-product-name: "GF615M-P33 (MS-7597)" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom@flashrom.org, thanks! Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 SPI control is 0x0012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom@flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. The following protocols are supported: SPI. […] No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.
hello kim and thanks for your report!
your log looks suspicious, maybe you have found a bug in our MCP61 code or the flash is not attached to the southbridge, but the fintek chip. could you please send us the output of "superiotool -dV", thanks.