Add... - M45PE10 - M45PE20 - M45PE40 - M45PE80 - M45PE16
Signed-off-by: Nikolay Nikolaev evrinoma@gmail.com Reviewed-by: Steven Zakulec spzakulec@gmail.com Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at --- flashchips.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ flashchips.h | 5 +++ 2 files changed, 140 insertions(+)
diff --git a/flashchips.c b/flashchips.c index 9b9979a..6bd92a6 100644 --- a/flashchips.c +++ b/flashchips.c @@ -6504,6 +6504,141 @@ const struct flashchip flashchips[] = {
{ .vendor = "Numonyx", + .name = "M45PE10", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE10, + .total_size = 128, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 512} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE20", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE20, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE40", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE40, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 2048} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE80", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE80, + .total_size = 1024, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 4096} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE16", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE16, + .total_size = 2048, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 8192} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", .name = "N25Q016", .bustype = BUS_SPI, .manufacture_id = ST_ID, diff --git a/flashchips.h b/flashchips.h index 768ba80..6e0646e 100644 --- a/flashchips.h +++ b/flashchips.h @@ -598,6 +598,11 @@ #define ST_M25P32 0x2016 #define ST_M25P64 0x2017 #define ST_M25P128 0x2018 +#define ST_M45PE10 0x4011 +#define ST_M45PE20 0x4012 +#define ST_M45PE40 0x4013 +#define ST_M45PE80 0x4014 +#define ST_M45PE16 0x4015 #define ST_M25PX16 0x7115 #define ST_M25PX32 0x7116 #define ST_M25PX64 0x7117