On Fri, 2010-07-16 at 12:55 +0200, Carl-Daniel Hailfinger wrote:
Hi Alec,
could you try this patch on your Xbox? If it works, please reply-to-all with the output from flashrom -V and include a line saying "Acked-by: Your Name your@email".
Add Winbond W49F020 support. This chip is used on some Xbox versions.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-w49f020/flashchips.c
--- flashrom-w49f020/flashchips.c (Revision 1082) +++ flashrom-w49f020/flashchips.c (Arbeitskopie) @@ -6474,6 +6474,29 @@
{ .vendor = "Winbond",
.name = "W49F020",.bustype = CHIP_BUSTYPE_PARALLEL,.manufacture_id = WINBOND_ID,.model_id = W_49F020,.total_size = 256,.page_size = 128,.feature_bits = FEATURE_EITHER_RESET,.tested = TEST_UNTESTED,.probe = probe_jedec,.probe_timing = 10,.block_erasers ={{.eraseblocks = { {256 * 1024, 1} },.block_erase = erase_chip_block_jedec,}},.write = write_jedec_1,.read = read_memmapped,- },
- {
.vendor = "Winbond",
I had some interesting results. It didnt compile as-is, since the svn version still has the board_enable.c:788 error, but when i applied the patch to your modified version, it compiled fine and detected the chip: flashrom output: http://pastebin.ca/1901707 flashrom -V output: http://pastebin.ca/1901709 But when I try flashrom -r test.bin, it says this: http://pastebin.ca/1901714 then it suddenly dies, or at least disconnects from the network, since my SSH session freezes. I could try plugging it into a TV to test it and see what the error is, if that'd help?
And apparently I'm supposed to say this: Acked-by: Alec Wright alecjw@member.fsf.org