Hello dear,
I've try to program an SPI flash from Macronix MX25V1635F and receive the following mensage from flashrom:
Calibrating delay loop... OK. Found Macronix flash chip "unknown Macronix SPI chip" (0 kB, SPI) on ft2232_spi. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Read is not working on this chip. Aborting.
Can you help with this?
Thank you very much,
Best regards
Emiliano