On 2024-12-10 17:17, Anastasia Klimchuk wrote:
I think these two lines show the error:
cb_in: error: LIBUSB_TRANSFER_TIMED_OUT ch341b_spi_spi_send_command: Failed to read 4 bytes
These 4 bytes are supposed to be device ID returned by the chip, and because of timeout we don't know the ID, and so can't finish the probing operation. This also explains why none of the chips work - probably the same timeout for each?
On Tue, Dec 10, 2024 at 10:02 PM S. bcs@uxdx.net wrote:
Hello,
in fact it was the lack of dependencies, which I have fixed now, on my PC only libjaylink 0.3.0 is missing (I only have version 0.2.0), but I don't need j-link.
Now flashrom recognizes the programmer but not the chip, I tested the follwing chips: Winbond 25Q16DV, Winbond W24X40 and Macronix 25L4005A
xc@pcs:~/flashrom$ flashrom -p ch341b_spi -c W25Q16.V --flash-name -VVV flashrom v1.5.0 on Linux 6.8.0-49-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with GCC 11.4.0, little endian Command line (6 args): flashrom -p ch341b_spi -c W25Q16.V --flash-name -VVV Strange: Empty eraseblock definition with non-empty erase function. Not an error. Initializing ch341b_spi programmer Device revision is 3.0.4 Wrote 3 bytes: aa 61 00 Wrote 4 bytes: ab b7 7f 20 The following protocols are supported: SPI. Probing for Winbond W25Q16.V, 2048 kB: master_map_flash_region: mapping W25Q16.V from 0x00000000ffe00000 to 0x0000000000000000 cb_in: error: LIBUSB_TRANSFER_TIMED_OUT ch341b_spi_spi_send_command: Failed to read 4 bytes master_unmap_flash_region: unmapped 0x0000000000000000 No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Wrote 4 bytes: ab b7 40 20
Regards Stephan
Am 10.12.24 um 07:05 schrieb Anastasia Klimchuk:
It seems libusb dependency is not recognised, in your case you need libusb. When you are building from source, in the beginning meson prints lots of info, find what it says about libusb. For example, on my environment here I have this line:
Run-time dependency libusb-1.0 found: YES 1.0.27
I suspect you have NO and you need to achieve YES Check the instructions about libraries, especially section on Ubuntu: https://flashrom.org/dev_guide/building_from_source.html
For your work to add support for CH341b it would be really good to have a patch eventually. Similar thing was implemented for ch347_spi recently, see how now it knows about two devices IDs and tries each of them: https://github.com/flashrom/flashrom/blob/main/ch347_spi.c#L60
On Mon, Dec 9, 2024 at 9:26 PM S. bcs@uxdx.net wrote:
Hello,
I've never programmed in C languages before, but it seemed easy to me since the only difference between ch341a and ch341b is that ch341b no longer needs an external crystal https://www.wch-ic.com/downloads/file/16.html (Chapter 3., Note). I therefore changed the PID in line 90 of ch341a_spi.c from 5512 to 5523 and added an entry for the ch341b in flashrom_udev.rules :
# Winchiphead (WCH) CH341b based programmer ATTRS{idVendor}==“1a86”, ATTRS{idProduct}==“5523”, MODE=“664”, GROUP="plugdev”
The result is that the flashrom call only shows a few programmers, I can no longer select the ch341:
flashrom v1.5.0 on Linux 6.8.0-49-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Please select a programmer with the --programmer parameter. Valid choices are: dummy, serprog, buspirate_spi, rayer_spi, pony_spi, linux_mtd, linux_spi.
flashrom 1.2 is delivered with Ubuntu, more programmers are offered:
flashrom v1.2 on Linux 6.8.0-49-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Please select a programmer with the --programmer parameter. To choose the mainboard of this computer use 'internal'. Valid choices are: internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, atavia, it8212, ft2232_spi, serprog, buspirate_spi, dediprog, developerbox, rayer_spi, pony_spi, nicintel, nicintel_spi, nicintel_eeprom, ogp_spi, satamv, linux_mtd, linux_spi, usbblaster_spi, pickit2_spi, ch341a_spi, digilent_spi, stlinkv3_spi.
Regards Stephan
Am 09.12.24 um 01:11 schrieb Anastasia Klimchuk:
Hello Stephan,
It's so good that you are trying to do things by yourself!
I understand you have written some code locally, which you are now trying to make work. Would you be comfortable to share this as a patch? This way people can look and perhaps give advice.
The instructions how to send a patch are here: https://flashrom.org/dev_guide/development_guide.html
You can add in the commit title "WIP", "doesn't work yet", or something like this. And post the link to the patch in this thread. Thank you!
On Sun, Dec 8, 2024 at 12:14 AM S. bcs@uxdx.net wrote:
Next errormessage, now he likes the VID 5523:
flashrom v1.5.0 on Linux 6.8.0-49-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org
Using default 2000kHz clock. Use 'spispeed' parameter to override. linux_spi_init: failed to set speed to 2000000Hz: Inappropriate ioctl for device Error: Programmer initialization failed.
Stephan
Am 07.12.24 um 13:58 schrieb S.: > Hello, > now I have tried it myself, the only difference I know between ch341a > and ch341b is PID:VID 1A86:5523 (instead of 1A86:5512). So I changed the > VID in ch341a_spi.c and flashrom_udev.rules. But unfortunately this does > not help, I get the error message “Couldn't open device 1a86:5512” when > starting flashrom, although in the source code PID:VID is now set to > 1a86:5523. Strange. > Stephan > > Am 25.10.24 um 15:36 schrieb S.: >> flashrom supports only programmers with ch341a, but many programmers >> sold now have ch341b onboard, pid:vid is then 1a86:5523 >> >> tnx in advance >> Stephan >> _______________________________________________ >> flashrom mailing list -- flashrom@flashrom.org >> To unsubscribe send an email to flashrom-leave@flashrom.org > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-leave@flashrom.org _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org
flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org
flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org