Re: [flashrom] [PATCH] Add support for RayeR SPIPGM hardware.

[Carl-Daniel Hailfinger]

On 21.07.2010 12:15, Michael Karcher wrote:
> Am Mittwoch, den 21.07.2010, 12:09 +0200 schrieb Carl-Daniel Hailfinger:
> > New version. Rename to rayer_spi. Add a manpage entry.
> >
> > Add support for RayeR SPIPGM hardware as described in
> > http://rayer.ic.cz/elektro/spipgm.htm
> >
> > To use the RayeR driver, run
> > flashrom -p rayer_spi -V
> >
> > Known bugs/limitations:
> > Won't compile/work on non-x86 architectures.
> > Will always use direct port I/O access.
> >
> > Log follows:
> >
> > flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 
> > 4.3.2, little endian
> > Calibrating delay loop... OK.
> > Initializing rayer_bitbang_spi programmer
> > Using port 0x378 as I/O base for parallel port access.
> > ...
> > Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 
> > 0xc2, id2 0x2015
> > ...
> > Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 
> > 0xffe00000.
> > ...
> > No operations were specified.
> >
> > Signed-off-by: Carl-Daniel Hailfinger 
> > Acked-by: Martin Rehak
>
> Looks good.
>
> Acked-by: Michael Karcher

Thanks, committed in r1093.

Regards,
Carl-Daniel