Change a few probe timings to TIMING_FIXME. They previously had TIMING_IGNORED, but now they use probe_jedec directly or indirectly and that function does not ignore probe timing.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: flashrom-probe_timing_fixme/flashchips.c =================================================================== --- flashrom-probe_timing_fixme/flashchips.c (Revision 844) +++ flashrom-probe_timing_fixme/flashchips.c (Arbeitskopie) @@ -4241,15 +4241,15 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */ + .probe_timing = TIMING_FIXME, .erase = erase_stm50flw0x0x, .write = write_stm50flw0x0x, .read = read_memmapped, },
{ .vendor = "ST", @@ -4258,15 +4258,15 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */ + .probe_timing = TIMING_FIXME, .erase = erase_stm50flw0x0x, .write = write_stm50flw0x0x, .read = read_memmapped, },
{ .vendor = "ST", @@ -4275,15 +4275,15 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW080A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PREW, .probe = probe_jedec, - .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */ + .probe_timing = TIMING_FIXME, .erase = erase_stm50flw0x0x, .write = write_stm50flw0x0x, .read = read_memmapped, },
{ .vendor = "ST", @@ -4292,15 +4292,15 @@ .manufacture_id = ST_ID, .model_id = ST_M50FLW080B, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */ + .probe_timing = TIMING_FIXME, .erase = erase_stm50flw0x0x, .write = write_stm50flw0x0x, .read = read_memmapped, },
{ .vendor = "ST", @@ -4692,15 +4692,15 @@ .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, .model_id = W_39V040C, .total_size = 512, .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_w39v040c, - .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w39v040c.c) */ + .probe_timing = TIMING_FIXME, .erase = erase_w39v040c, .write = write_w39v040c, .read = read_memmapped, },
{ .vendor = "Winbond",