Overall I like the concept of this patch, and I think it should get merged.
I'm not entirely convinced that redirecting people using the chromiumos branch to a separate list will significantly reduce the traffic on this list though. AFAICT most people who report issues are trying to flash manually with upstream flashrom (or a version bundled with their distro) and encounter issues with the ME or some such.
On Thu, Aug 21, 2014 at 1:16 AM, Stefan Tauner < stefan.tauner@alumni.tuwien.ac.at> wrote:
Use it throughout the source to allow for printing alternative support email addresses (e.g. for distributions, chromiumos or other 3rd parties). Also, fix some indentions on the way.
Signed-off-by: Stefan Tauner stefan.tauner@alumni.tuwien.ac.at
This of course only makes sense if someone uses it (and in the case of chromium port it to their tree... and set up some kind of community mailing list or something?). Therefore I would like to hear your thoughts about it. Would you use it?
Makefile | 3 +++ bitbang_spi.c | 2 +- board_enable.c | 12 ++++++------ chipset_enable.c | 16 ++++++---------- cli_common.c | 2 +- dediprog.c | 10 +++++----- flashrom.c | 50 +++++++++++++++++++++----------------------------- jedec.c | 2 +- opaque.c | 2 +- pcidev.c | 10 +++++----- physmap.c | 6 ++---- print.c | 2 +- programmer.c | 2 +- sb600spi.c | 8 ++++---- sfdp.c | 5 ++--- spi.c | 6 +++--- spi25.c | 6 +++--- 17 files changed, 66 insertions(+), 78 deletions(-)
diff --git a/Makefile b/Makefile index 98230a5..1e85f41 100644 --- a/Makefile +++ b/Makefile @@ -19,6 +19,7 @@ #
PROGRAM = flashrom +SUPPORT_EMAIL = flashrom@flashrom.org
############################################################################### # Defaults for the toolchain. @@ -723,6 +724,8 @@ endif
FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'")
+FEATURE_CFLAGS += -D'SUPPORT_EMAIL="$(SUPPORT_EMAIL)"'
# We could use PULLED_IN_LIBS, but that would be ugly. FEATURE_LIBS += $(shell LC_ALL=C grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz")
diff --git a/bitbang_spi.c b/bitbang_spi.c index 0b27a67..9a0441c 100644 --- a/bitbang_spi.c +++ b/bitbang_spi.c @@ -94,7 +94,7 @@ int register_spi_bitbang_master(const struct bitbang_spi_master *master) (master->request_bus && !master->release_bus) || (!master->request_bus && master->release_bus)) { msg_perr("Incomplete SPI bitbang master setting!\n"
"Please report a bug at flashrom@flashrom.org\n");
"Please report a bug at " SUPPORT_EMAIL "\n"); return ERROR_FLASHROM_BUG; }diff --git a/board_enable.c b/board_enable.c index 1235bb8..6606a59 100644 --- a/board_enable.c +++ b/board_enable.c @@ -335,7 +335,7 @@ void probe_superio_winbond(void) } msg_pinfo("Active config mode, unknown reg 0x20 ID: %02x.\n", model); msg_pinfo("Please send the output of "flashrom -V -p internal" to \n"
"flashrom@flashrom.org with W836xx:your board name: flashrom -V\n"
SUPPORT_EMAIL " with W836xx: your boardname: flashrom -V\n" "as the subject to help us finish support for your Super I/O. Thanks.\n"); continue; } @@ -620,7 +620,7 @@ int it8705f_write_enable(uint8_t port) /* The data sheet contradicts itself about max size. */ max_rom_decode.parallel = 1024 * 1024; msg_pinfo("IT8705F with very unusual settings.\n"
"Please send the output of \"flashrom -V-p internal" to flashrom@flashrom.org\n"
"Please send the output of \"flashrom -V-p internal" to " SUPPORT_EMAIL "\n" "with "IT8705: your board name: flashrom -V" as the subject to help us finish\n" "support for your Super I/O. Thanks.\n"); ret = 1; @@ -2479,7 +2479,7 @@ int selfcheck_board_enables(void) const struct board_match *b = &board_matches[i]; if (b->vendor_name == NULL || b->board_name == NULL) { msg_gerr("ERROR: Board enable #%d does not define a vendor and board name.\n"
"Please report a bug atflashrom@flashrom.org\n", i);
"Please report a bug at " SUPPORT_EMAIL"\n", i); ret = 1; continue; } @@ -2488,7 +2488,7 @@ int selfcheck_board_enables(void) ((b->lb_vendor == NULL) ^ (b->lb_part == NULL)) || (b->max_rom_decode_parallel == 0 && b->enable == NULL)) { msg_gerr("ERROR: Board enable for %s %s is misdefined.\n"
"Please report a bug atflashrom@flashrom.org\n",
"Please report a bug at " SUPPORT_EMAIL"\n", b->vendor_name, b->board_name); ret = 1; } @@ -2553,7 +2553,7 @@ static const struct board_match *board_match_name(const char *vendor, const char if (partmatch) { /* More than one entry has a matching name. */ msg_perr("Board name "%s":"%s" and PCI IDs matched more than one board enable "
"entry. Please report a bug atflashrom@flashrom.org\n", vendor, model);
"entry. Please report a bug at "SUPPORT_EMAIL "\n", vendor, model); return NULL; } partmatch = board; @@ -2636,7 +2636,7 @@ static int board_enable_safetycheck(const struct board_match *board) return 1; } msg_pwarn("NOTE: Running an untested board enable procedure.\n"
"Please report success/failure to flashrom@flashrom.org.\n");
"Please report success/failure to " SUPPORT_EMAIL ".\n"); return 0;}
diff --git a/chipset_enable.c b/chipset_enable.c index dd4e0ea..8334866 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1393,7 +1393,7 @@ static int enable_flash_mcp6x_7x(struct pci_dev *dev, const char *name) internal_buses_supported = BUS_NONE; msg_pwarn("Flash bus type is unknown (none)\n"); msg_pinfo("Please send the log files created by "flashrom -p internal -o logfile" to \n"
"flashrom@flashrom.org with \"your board name:flashrom -V" as the subject to\n"
SUPPORT_EMAIL " with \"your board name: flashrom-V" as the subject to\n" "help us finish support for your chipset. Thanks.\n"); return ERROR_NONFATAL; } @@ -1791,14 +1791,10 @@ int chipset_flash_enable(void) if (!dev) continue; if (ret != -2) {
msg_pwarn("Warning: unexpected second chipsetmatch: "
"\"%s %s\"\n""ignoring, please report lspci and boardURL "
"to flashrom@flashrom.org\n""with \'CHIPSET: your board name\' inthe "
"subject line.\n",chipset_enables[i].vendor_name,chipset_enables[i].device_name);
msg_pwarn("Warning: unexpected second chipsetmatch: "%s %s"\n"
"ignoring, please report lspci and boardURL to " SUPPORT_EMAIL "\n"
"with \'CHIPSET: your board name\' inthe subject line.\n",
chipset_enables[i].vendor_name,chipset_enables[i].device_name); continue; } msg_pinfo("Found chipset "%s %s"", @@ -1815,7 +1811,7 @@ int chipset_flash_enable(void) "flashrom *and* were (not) able to " "successfully update your firmware with it,\n" "then please email a report to "
"flashrom@flashrom.org including averbose "
SUPPORT_EMAIL " including a verbose " "(-V) log.\nThank you!\n"); } msg_pinfo("Enabling flash write... ");diff --git a/cli_common.c b/cli_common.c index 71cc2dd..1cae546 100644 --- a/cli_common.c +++ b/cli_common.c @@ -107,7 +107,7 @@ void print_chip_support_status(const struct flashchip *chip) } msg_cinfo("The test status of this chip may have been updated in the latest development\n" "version of flashrom. If you are running the latest development version,\n"
"please email a report to flashrom@flashrom.orgif any of the above operations\n"
"please email a report to " SUPPORT_EMAIL " ifany of the above operations\n" "work correctly for you with this flash chip. Please include the flashrom log\n" "file for all operations you tested (see the man page for details), and mention\n" "which mainboard or programmer you tested in the subject line.\n" diff --git a/dediprog.c b/dediprog.c index 71a9f8b..676248b 100644 --- a/dediprog.c +++ b/dediprog.c @@ -219,8 +219,8 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, (chunksize >> 8) & 0xff};
if ((start % chunksize) || (len % chunksize)) {
msg_perr("%s: Unaligned start=%i, len=%i! Please report abug "
"at flashrom@flashrom.org\n", __func__, start,len);
msg_perr("%s: Unaligned start=%i, len=%i! Please report abug at " SUPPORT_EMAIL "\n",
__func__, start, len); return 1; }@@ -326,13 +326,13 @@ static int dediprog_spi_bulk_write(struct flashctx *flash, const uint8_t *buf, u */ if (chunksize != 256) { msg_perr("%s: Chunk sizes other than 256 bytes are unsupported, chunksize=%u!\n"
"Please report a bug at flashrom@flashrom.org\n",__func__, chunksize);
"Please report a bug at " SUPPORT_EMAIL "\n",__func__, chunksize); return 1; }
if ((start % chunksize) || (len % chunksize)) {
msg_perr("%s: Unaligned start=%i, len=%i! Please report abug "
"at flashrom@flashrom.org\n", __func__, start,len);
msg_perr("%s: Unaligned start=%i, len=%i!\nPlease report abug at " SUPPORT_EMAIL "\n",
__func__, start, len); return 1; }diff --git a/flashrom.c b/flashrom.c index 93b292b..1148fd4 100644 --- a/flashrom.c +++ b/flashrom.c @@ -558,8 +558,7 @@ char *extract_param(const char *const *haystack, const char *needle, const char
needlelen = strlen(needle); if (!needlelen) {
msg_gerr("%s: empty needle! Please report a bug at ""flashrom@flashrom.org\n", __func__);
msg_gerr("%s: empty needle! Please report a bug at "SUPPORT_EMAIL "\n", __func__); return NULL; } /* No programmer parameters given. */ @@ -780,8 +779,7 @@ int need_erase(const uint8_t *have, const uint8_t *want, unsigned int len, enum result = 0; break; default:
msg_cerr("%s: Unsupported granularity! Please report a bugat "
"flashrom@flashrom.org\n", __func__);
msg_cerr("%s: Unsupported granularity! Please report a bugat " SUPPORT_EMAIL "\n", __func__); } return result; } @@ -842,8 +840,7 @@ static unsigned int get_next_write(const uint8_t *have, const uint8_t *want, uns stride = 1056; break; default:
msg_cerr("%s: Unsupported granularity! Please report a bugat "
"flashrom@flashrom.org\n", __func__);
msg_cerr("%s: Unsupported granularity! Please report a bugat " SUPPORT_EMAIL "\n", __func__); /* Claim that no write was needed. A write with unknown * granularity is too dangerous to try. */ @@ -1119,7 +1116,7 @@ int probe_flash(struct registered_master *mst, int startchip, struct flashctx *f
msg_cinfo(" we need to add them manually.\n" "You can help us by mailing us theoutput of the following command to "
"flashrom@flashrom.org:\n"
SUPPORT_EMAIL ":\n" "'flashrom -VV [plus the -p/--programmerparameter]'\n" "Thanks for your help!\n" "===\n"); @@ -1278,19 +1275,17 @@ static int selfcheck_eraseblocks(const struct flashchip *chip) /* Blocks with zero size are bugs in flashchips.c. */ if (eraser.eraseblocks[i].count && !eraser.eraseblocks[i].size) {
msg_gerr("ERROR: Flash chip %s erasefunction "
"%i region %i has size 0. Pleasereport"
" a bug at flashrom@flashrom.org\n",
chip->name, k, i);
msg_gerr("ERROR: Flash chip %s erasefunction %i region %i has size 0.\n"
"Please report a bug at "SUPPORT_EMAIL "\n",
chip->name, k, i); ret = 1; } /* Blocks with zero count are bugs inflashchips.c. */ if (!eraser.eraseblocks[i].count && eraser.eraseblocks[i].size) {
msg_gerr("ERROR: Flash chip %s erasefunction "
"%i region %i has count 0. Pleasereport"
" a bug at flashrom@flashrom.org\n",
chip->name, k, i);
msg_gerr("ERROR: Flash chip %s erasefunction %i region %i has count 0.\n"
"Please report a bug at "SUPPORT_EMAIL "\n",
chip->name, k, i); ret = 1; } done += eraser.eraseblocks[i].count *@@ -1303,11 +1298,9 @@ static int selfcheck_eraseblocks(const struct flashchip *chip) if (!done) continue; if (done != chip->total_size * 1024) {
msg_gerr("ERROR: Flash chip %s erase function %i ""region walking resulted in 0x%06x bytestotal,"
" expected 0x%06x bytes. Please report abug at"
" flashrom@flashrom.org\n", chip->name, k,done, chip->total_size * 1024);
msg_gerr("ERROR: Flash chip %s erase function %iregion walking resulted in "
"0x%06x bytes total, expected 0x%06xbytes. Please report a bug at"
SUPPORT_EMAIL "\n", chip->name, k, done,chip->total_size * 1024); ret = 1; } if (!eraser.block_erase) @@ -1319,10 +1312,9 @@ static int selfcheck_eraseblocks(const struct flashchip *chip) for (j = k + 1; j < NUM_ERASEFUNCTIONS; j++) { if (eraser.block_erase == chip->block_erasers[j].block_erase) {
msg_gerr("ERROR: Flash chip %s erasefunction "
"%i and %i are identical. Pleasereport"
" a bug at flashrom@flashrom.org\n",
chip->name, k, j);
msg_gerr("ERROR: Flash chip %s erasefunction %i and %i are identical.\n"
"Please report a bug at "SUPPORT_EMAIL "\n",
chip->name, k, j); ret = 1; } }@@ -1518,7 +1510,7 @@ static void nonfatal_help_message(void) if (programmer == PROGRAMMER_INTERNAL) msg_gerr("This means we have to add special support for your board, programmer or flash\n" "chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or\n"
"mail flashrom@flashrom.org, thanks!\n"
"mail " SUPPORT_EMAIL ", thanks!\n""-------------------------------------------------------------------------------\n" "You may now reboot or simply leave the machine running.\n"); else @@ -1526,7 +1518,7 @@ static void nonfatal_help_message(void) msg_gerr("Please check the connections (especially those to write protection pins) between\n" "the programmer and the flash chip. If you think the error is caused by flashrom\n" "please report this on IRC at chat.freenode.net (channel #flashrom) or\n"
"mail flashrom@flashrom.org, thanks!\n");
"mail " SUPPORT_EMAIL ", thanks!\n");}
static void emergency_help_message(void) @@ -1535,13 +1527,13 @@ static void emergency_help_message(void) #if CONFIG_INTERNAL == 1 if (programmer == PROGRAMMER_INTERNAL) msg_gerr("Get help on IRC at chat.freenode.net (channel #flashrom) or\n"
"mail flashrom@flashrom.org with the subject"FAILED: <your board name>"!\n"
"mail " SUPPORT_EMAIL " with the subject \"FAILED:<your board name>"!\n"
"-------------------------------------------------------------------------------\n" "DO NOT REBOOT OR POWEROFF!\n"); else #endif msg_gerr("Please report this on IRC at chat.freenode.net (channel #flashrom) or\n"
"mail flashrom@flashrom.org, thanks!\n");
"mail " SUPPORT_EMAIL ", thanks!\n");}
/* The way to go if you want a delimited list of programmers */ @@ -1755,7 +1747,7 @@ int selfcheck(void) if (chip->vendor == NULL || chip->name == NULL || chip->bustype == BUS_NONE) { ret = 1; msg_gerr("ERROR: Some field of flash chip #%d (%s) is misconfigured.\n"
"Please report a bug atflashrom@flashrom.org\n", i,
"Please report a bug at "SUPPORT_EMAIL "\n", i, chip->name == NULL ? "unnamed" : chip->name); } if (selfcheck_eraseblocks(chip)) { diff --git a/jedec.c b/jedec.c index 358b850..fa02c7b 100644 --- a/jedec.c +++ b/jedec.c @@ -669,7 +669,7 @@ static int changelock_regspace2_block(const struct flashctx *flash, chipaddr off
if (new_bits & ~REG2_MASK) { msg_cerr("Invalid locking change 0x%02x requested at0x%0*" PRIxPTR "! "
"Please report a bug at flashrom@flashrom.org\n",
"Please report a bug at " SUPPORT_EMAIL "\n", new_bits, PRIxPTR_WIDTH, offset); return -1; }diff --git a/opaque.c b/opaque.c index a5a829c..5bf6737 100644 --- a/opaque.c +++ b/opaque.c @@ -56,7 +56,7 @@ int register_opaque_master(const struct opaque_master *mst)
if (!mst->probe || !mst->read || !mst->write || !mst->erase) { msg_perr("%s called with incomplete master definition. "
"Please report a bug at flashrom@flashrom.org\n",
"Please report a bug at " SUPPORT_EMAIL "\n", __func__); return ERROR_FLASHROM_BUG; }diff --git a/pcidev.c b/pcidev.c index 2c78063..6023438 100644 --- a/pcidev.c +++ b/pcidev.c @@ -146,7 +146,7 @@ uintptr_t pcidev_readbar(struct pci_dev *dev, int bar) addr &= PCI_ROM_ADDRESS_MASK; break; case TYPE_UNKNOWN:
msg_perr("BAR type unknown, please report a bug atflashrom@flashrom.org\n");
msg_perr("BAR type unknown, please report a bug at "SUPPORT_EMAIL "\n"); }
return (uintptr_t)addr;@@ -156,7 +156,7 @@ static int pcidev_shutdown(void *data) { if (pacc == NULL) { msg_perr("%s: Tried to cleanup an invalid PCI context!\n"
"Please report a bug at flashrom@flashrom.org\n",__func__);
"Please report a bug at " SUPPORT_EMAIL "\n",__func__); return 1; } pci_cleanup(pacc); @@ -167,7 +167,7 @@ int pci_init_common(void) { if (pacc != NULL) { msg_perr("%s: Tried to allocate a new PCI context, but there is still an old one!\n"
"Please report a bug at flashrom@flashrom.org\n",__func__);
"Please report a bug at " SUPPORT_EMAIL "\n",__func__); return 1; } pacc = pci_alloc(); /* Get the pci_access structure */ @@ -225,7 +225,7 @@ struct pci_dev *pcidev_init(const struct dev_entry *devs, int bar) if (devs[i].status == NT) msg_pinfo("===\nThis PCI device is UNTESTED. Please report the 'flashrom -p " "xxxx' output \n"
"to flashrom@flashrom.org if itworks for you. Please add the name "
"to " SUPPORT_EMAIL " if itworks for you. Please add the name " "of your\n" "PCI device to the subject. Thank you for your help!\n===\n");
@@ -274,7 +274,7 @@ int undo_pci_write(void *p) struct undo_pci_write_data *data = p; if (pacc == NULL) { msg_perr("%s: Tried to undo PCI writes without a valid PCI context!\n"
"Please report a bug at flashrom@flashrom.org\n",__func__);
"Please report a bug at " SUPPORT_EMAIL "\n",__func__); return 1; } msg_pdbg("Restoring PCI config space for %02x:%02x:%01x reg 0x%02x\n", diff --git a/physmap.c b/physmap.c index ca5afd0..6fb5e3b 100644 --- a/physmap.c +++ b/physmap.c @@ -308,8 +308,7 @@ void physunmap_unaligned(void *virt_addr, size_t len) { /* No need to check for zero size, such mappings would have yielded ERROR_PTR. */ if (virt_addr == ERROR_PTR) {
msg_perr("Trying to unmap a nonexisting mapping!\n""Please report a bug at flashrom@flashrom.org\n");
msg_perr("Trying to unmap a nonexisting mapping!\nPleasereport a bug at " SUPPORT_EMAIL "\n"); return; }
@@ -322,8 +321,7 @@ void physunmap(void *virt_addr, size_t len)
/* No need to check for zero size, such mappings would haveyielded ERROR_PTR. */ if (virt_addr == ERROR_PTR) {
msg_perr("Trying to unmap a nonexisting mapping!\n""Please report a bug at flashrom@flashrom.org\n");
msg_perr("Trying to unmap a nonexisting mapping!\nPleasereport a bug at " SUPPORT_EMAIL "\n"); return; } tmp = (uintptr_t)virt_addr; diff --git a/print.c b/print.c index 243aa49..de9f85f 100644 --- a/print.c +++ b/print.c @@ -522,7 +522,7 @@ int print_supported(void) break; default: msg_gerr("\n%s: %s: Uninitialized programmer type! Please report a bug at "
"flashrom@flashrom.org\n", __func__,prog.name);
SUPPORT_EMAIL "\n", __func__, prog.name); break; } }diff --git a/programmer.c b/programmer.c index fd634b2..c88e9b5 100644 --- a/programmer.c +++ b/programmer.c @@ -103,7 +103,7 @@ int register_par_master(const struct par_master *mst, !mst->chip_writen || !mst->chip_readb || !mst->chip_readw || !mst->chip_readl || !mst->chip_readn) { msg_perr("%s called with incomplete master definition. "
"Please report a bug at flashrom@flashrom.org\n",
"Please report a bug at " SUPPORT_EMAIL "\n", __func__); return ERROR_FLASHROM_BUG; }diff --git a/sb600spi.c b/sb600spi.c index 69fad65..381254e 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -106,8 +106,8 @@ static void determine_generation(struct pci_dev *dev) msg_pdbg("SB8xx/SB9xx/Hudson-1 detected.\n"); } else { msg_pwarn("SB device found but SMBus revision 0x%02x does not match known values.\n"
"Assuming SB8xx/SB9xx/Hudson-1. Pleasesend a log to flashrom@flashrom.org\n",
rev);
"Assuming SB8xx/SB9xx/Hudson-1. Pleasesend a log to " SUPPORT_EMAIL "\n",
rev); amd_gen = CHIPSET_SB89XX; } } else if (dev->device_id == 0x780e) {@@ -146,13 +146,13 @@ static void determine_generation(struct pci_dev *dev) msg_pdbg("Yangtze detected.\n"); } else { msg_pwarn("FCH device found but SMBus revision 0x%02x does not match known values.\n"
"Please report this toflashrom@flashrom.org and include this log and\n"
"Please report this to " SUPPORT_EMAIL "and include this log and\n" "the output of lspci -nnvx, thanks!.\n", rev); } #endif } else msg_pwarn("%s: Unknown LPC device %" PRIx16 ":%" PRIx16 ".\n"
"Please report this to flashrom@flashrom.organd include this log and\n"
"Please report this to " SUPPORT_EMAIL " andinclude this log and\n" "the output of lspci -nnvx, thanks!\n", __func__, dev->vendor_id, dev->device_id); } diff --git a/sfdp.c b/sfdp.c index bc69dd0..ed22392 100644 --- a/sfdp.c +++ b/sfdp.c @@ -89,8 +89,7 @@ static int sfdp_add_uniform_eraser(struct flashchip *chip, uint8_t opcode, uint3
if (erasefn == NULL || total_size == 0 || block_size == 0 || total_size % block_size != 0) {
msg_cdbg("%s: invalid input, please report to ""flashrom@flashrom.org\n", __func__);
msg_cdbg("%s: invalid input, please report to "SUPPORT_EMAIL "\n", __func__); return 1; }
@@ -120,7 +119,7 @@ static int sfdp_add_uniform_eraser(struct flashchip *chip, uint8_t opcode, uint3 return 0; } msg_cinfo("%s: Not enough space to store another eraser (i=%d)."
" Please report this at flashrom@flashrom.org\n",
" Please report this at " SUPPORT_EMAIL "\n", __func__, i); return 1;} diff --git a/spi.c b/spi.c index 894f73f..102e9b5 100644 --- a/spi.c +++ b/spi.c @@ -82,7 +82,7 @@ int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at "
"flashrom@flashrom.org\n", __func__);
SUPPORT_EMAIL "\n", __func__); return 1; } return spi_read_chunked(flash, buf, start, len, max_data);@@ -94,7 +94,7 @@ int default_spi_write_256(struct flashctx *flash, const uint8_t *buf, unsigned i if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at "
"flashrom@flashrom.org\n", __func__);
"" SUPPORT_EMAIL "\n", __func__); return 1; } return spi_write_chunked(flash, buf, start, len, max_data);@@ -174,7 +174,7 @@ int register_spi_master(const struct spi_master *mst) ((mst->command == default_spi_send_command) && (mst->multicommand == default_spi_send_multicommand))) { msg_perr("%s called with incomplete master definition. "
"Please report a bug at flashrom@flashrom.org\n",
"Please report a bug at " SUPPORT_EMAIL "\n", __func__); return ERROR_FLASHROM_BUG; }diff --git a/spi25.c b/spi25.c index 673bdf5..5cb9632 100644 --- a/spi25.c +++ b/spi25.c @@ -835,7 +835,7 @@ erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode) return &spi_block_erase_db; default: msg_cinfo("%s: unknown erase opcode (0x%02x). Please report "
"this at flashrom@flashrom.org\n", __func__,opcode);
"this at " SUPPORT_EMAIL "\n", __func__, opcode); return NULL; }} @@ -1101,7 +1101,7 @@ int default_spi_write_aai(struct flashctx *flash, const uint8_t *buf, unsigned i /* The data sheet requires a start address with the low bit cleared. */ if (start % 2) { msg_cerr("%s: start address not even! Please report a bug at "
"flashrom@flashrom.org\n", __func__);
"" SUPPORT_EMAIL "\n", __func__); if (spi_chip_write_1(flash, buf, start, start % 2)) return SPI_GENERIC_ERROR; pos += start % 2;@@ -1119,7 +1119,7 @@ int default_spi_write_aai(struct flashctx *flash, const uint8_t *buf, unsigned i /* The data sheet requires total AAI write length to be even. */ if (len % 2) { msg_cerr("%s: total write length not even! Please report a "
"bug at flashrom@flashrom.org\n", __func__);
"bug at " SUPPORT_EMAIL "\n", __func__); /* Do not return an error for now. */ //return SPI_GENERIC_ERROR; }-- Kind regards, Stefan Tauner