[flashrom] [PATCH] Fix compilation for CONFIG_INTERNAL=no

[Carl-Daniel Hailfinger]

Fix compilation for CONFIG_INTERNAL=no

CONFIG_INTERNAL implies Super I/O support and NEED_PCI.
NEED_PCI is only used to guard PCI stuff which may be needed for
external PCI-based programmers. That way, using #if NEED_PCI can be
avoided inside -if CONFIG_INTERNAL.

Please note that the patch seems to be nonsensical in some hunks, but if
you look at the patched file you'll notice it's OK.

Signed-off-by: Carl-Daniel Hailfinger

Index: flashrom-compilefixes/buspirate_spi.c
===================================================================
--- flashrom-compilefixes/buspirate_spi.c	(Revision 1325)
+++ flashrom-compilefixes/buspirate_spi.c	(Arbeitskopie)
@@ -30,6 +30,11 @@
 /* Change this to #define if you want to test without a serial implementation */
 #undef FAKE_COMMUNICATION

+struct buspirate_spispeeds {
+	const char *name;
+	const int speed;
+};
+
 #ifndef FAKE_COMMUNICATION
 static int buspirate_serialport_setup(char *dev)
 {
Index: flashrom-compilefixes/programmer.h
===================================================================
--- flashrom-compilefixes/programmer.h	(Revision 1325)
+++ flashrom-compilefixes/programmer.h	(Arbeitskopie)
@@ -239,7 +239,7 @@
 void print_supported_pcidevs(const struct pcidev_status *devs);
 #endif

-#if CONFIG_INTERNAL
+#if CONFIG_INTERNAL == 1
 /* board_enable.c */
 void w836xx_ext_enter(uint16_t port);
 void w836xx_ext_leave(uint16_t port);
@@ -262,6 +262,7 @@
 void *physmap(const char *descr, unsigned long phys_addr, size_t len);
 void *physmap_try_ro(const char *descr, unsigned long phys_addr, size_t len);
 void physunmap(void *virt_addr, size_t len);
+#if CONFIG_INTERNAL == 1
 int setup_cpu_msr(int cpu);
 void cleanup_cpu_msr(void);

@@ -277,7 +278,6 @@
 int dmi_match(const char *pattern);

/* internal.c */
-#if NEED_PCI == 1
 struct superio {
    uint16_t vendor;
    uint16_t port;
@@ -287,6 +287,8 @@
 extern int superio_count;
 #define SUPERIO_VENDOR_NONE	0x0
 #define SUPERIO_VENDOR_ITE	0x1
+#endif
+#if NEED_PCI == 1
 struct pci_dev *pci_dev_find_filter(struct pci_filter filter);
 struct pci_dev *pci_dev_find_vendorclass(uint16_t vendor, uint16_t class);
 struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device);
@@ -491,28 +493,21 @@
 int rayer_spi_init(void);
 #endif

-/* mcp6x_spi.c */
-#if CONFIG_INTERNAL == 1
-#if defined(__i386__) || defined(__x86_64__)
-int mcp6x_spi_init(int want_spi);
-#endif
-#endif
-
 /* bitbang_spi.c */
 int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod);
 int bitbang_spi_shutdown(const struct bitbang_spi_master *master);

/* buspirate_spi.c */
-struct buspirate_spispeeds {
-	const char *name;
-	const int speed;
-};
+#if CONFIG_BUSPIRATE_SPI == 1
 int buspirate_spi_init(void);
 int buspirate_spi_shutdown(void);
+#endif

/* dediprog.c */
+#if CONFIG_DEDIPROG == 1
 int dediprog_init(void);
 int dediprog_shutdown(void);
+#endif

/* flashrom.c */
 struct decode_sizes {
@@ -593,7 +588,6 @@
 int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb,
    	    int ich_generation);
 int via_init_spi(struct pci_dev *dev);
-#endif

/* it85spi.c */
 int it85xx_spi_init(struct superio s);
@@ -605,23 +599,25 @@
 void probe_superio_ite(void);
 int init_superio_ite(void);

+/* mcp6x_spi.c */
+int mcp6x_spi_init(int want_spi);
+
 /* sb600spi.c */
-#if CONFIG_INTERNAL == 1
 int sb600_probe_spi(struct pci_dev *dev);
-#endif

/* wbsio_spi.c */
-#if CONFIG_INTERNAL == 1
 int wbsio_check_for_spi(void);
 #endif

/* serprog.c */
+#if CONFIG_SERPROG == 1
 int serprog_init(void);
 int serprog_shutdown(void);
 void serprog_chip_writeb(uint8_t val, chipaddr addr);
 uint8_t serprog_chip_readb(const chipaddr addr);
 void serprog_chip_readn(uint8_t *buf, const chipaddr addr, size_t len);
 void serprog_delay(int delay);
+#endif

/* serial.c */
 #if _WIN32