[flashrom] flashrom tested on alix2d3 board

14 Nov 2011


      Hello,
i just got the flashrom utility from svn.
Development System was voyage-0.8.0 Linux http://linux.voyage.hk/ ( Debian based )
After compiling and reading the bios, i tested writing and it worked. Great Job Guys :-)
Here are the information needed.
---------------------------- Hardware:
PC Engines Alix.2d3 Board
http://pcengines.ch/alix2d3.htm
---------------------------- flashrom -V
flashrom v0.9.4-r1465 on Linux 3.0.0-voyage (i586), built with libpci 3.1.7, GCC 4.4.5, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 14 usecs, 160M loops per second, 10 myus = 21 us, 100 myus = 108 us, 1000 myus = 1097 us, 10000 myus = 10101 us, 56 myus = 65 us, OK.
Initializing internal programmer
No coreboot table found.
sh: dmidecode: not found
dmidecode execution unsuccessful - continuing without DMI info
Found chipset "AMD CS5536" with PCI ID 1022:2080. Enabling flash write... OK.
WARNING: unexpected second chipset match: "AMD CS5536"
ignoring, please report lspci and board URL to flashrom@flashrom.org
with 'CHIPSET: your board name' in the subject line.
This programmer supports the following protocols: Non-SPI.
Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Found AMIC flash chip "A49LF040A" (512 kB, LPC) at physical address 0xfff80000.
Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x03, id2 0x00
Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xeb, id2 0x05, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x03, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Found AMIC flash chip "A49LF040A" (512 kB, LPC).
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
No operations were specified.
--------------------- flashrom -Vr
Reading flash... done.
--------------------- flashrom -VE
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:E, 0x010000-0x01ffff:E, 0x020000-0x02ffff:E, 0x030000-0x03ffff:E, 0x040000-0x04ffff:E, 0x050000-0x05ffff:E, 0x060000-0x06ffff:E, 0x070000-0x07ffff:E
Erase/write done.
--------------------- flashrom -Vw
flashrom v0.9.4-r1465 on Linux 3.0.0-voyage (i586), built with libpci 3.1.7, GCC 4.4.5, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 13 usecs, 160M loops per second, 10 myus = 21 us, 100 myus = 108 us, 1000 myus = 1019 us, 10000 myus = 10214 us, 52 myus = 62 us, OK.
Initializing internal programmer
No coreboot table found.
sh: dmidecode: not found
dmidecode execution unsuccessful - continuing without DMI info
Found chipset "AMD CS5536" with PCI ID 1022:2080. Enabling flash write... OK.
WARNING: unexpected second chipset match: "AMD CS5536"
ignoring, please report lspci and board URL to flashrom@flashrom.org
with 'CHIPSET: your board name' in the subject line.
This programmer supports the following protocols: Non-SPI.
Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Found AMIC flash chip "A49LF040A" (512 kB, LPC) at physical address 0xfff80000.
Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x37, id2 0x9d
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x37, id2 0x9d
Found AMIC flash chip "A49LF040A" (512 kB, LPC).
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-Vw, -VE), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:W, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:W, 0x070000-0x07ffff:W
Erase/write done.
Verifying flash... VERIFIED.
--------------------- lspci -nnvvxxx
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33)
    Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 248, Cache Line Size: 32 bytes
    Region 0: I/O ports at ac1c [size=4]
00: 22 10 80 20 05 00 20 02 33 00 00 06 08 f8 80 00
10: 1d ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 80 20
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
    Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 9
    Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
    Kernel driver in use: Geode LX AES
00: 22 10 82 20 06 00 a0 02 00 00 10 10 08 00 00 00
10: 00 40 ff ef 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 82 20
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
    Subsystem: VIA Technologies, Inc. Device [1106:0106]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: I/O ports at 1000 [size=256]
    Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [40] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: via-rhine
00: 06 11 53 30 97 00 10 02 96 00 00 02 08 40 00 00
10: 01 10 00 00 00 00 00 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 06 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
    Subsystem: VIA Technologies, Inc. Device [1106:0106]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 0
    Region 0: I/O ports at 1400 [size=256]
    Region 1: Memory at e0040000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [40] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: via-rhine
00: 06 11 53 30 97 00 10 02 96 00 00 02 08 40 00 00
10: 01 14 00 00 00 00 04 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 06 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0b.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
    Subsystem: VIA Technologies, Inc. Device [1106:0106]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 0
    Region 0: I/O ports at 1800 [size=256]
    Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [40] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: via-rhine
00: 06 11 53 30 97 00 10 02 96 00 00 02 08 40 00 00
10: 01 18 00 00 00 00 08 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 06 01
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 03 08
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03)
    Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090]
    Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Region 0: I/O ports at 6000 [size=8]
    Region 1: I/O ports at 6100 [size=256]
    Region 2: I/O ports at 6200 [size=64]
    Region 3: I/O ports at <unassigned>
    Region 4: I/O ports at 9d00 [size=128]
    Region 5: I/O ports at 9c00 [size=64]
    Kernel driver in use: cs5535-mfd
00: 22 10 90 20 09 00 a0 02 03 00 01 06 08 40 80 00
10: 01 60 00 00 01 61 00 00 01 62 00 00 01 00 00 00
20: 01 9d 00 00 01 9c 00 00 00 00 00 00 22 10 90 20
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
    Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 248, Cache Line Size: 32 bytes
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    Region 4: I/O ports at ff00 [size=16]
    Kernel driver in use: AMD_IDE
00: 22 10 9a 20 05 00 a0 02 01 80 01 01 08 f8 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 ff 00 00 00 00 00 00 00 00 00 00 22 10 9a 20
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 02 f0 00 00 00 00 00 00 00 00 98 33 00 00 00 91
50: 00 00 03 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
    Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin D routed to IRQ 12
    Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [40] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ohci_hcd
00: 22 10 94 20 06 00 30 02 02 10 03 0c 08 00 00 00
10: 00 e0 ff ef 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 94 20
30: 00 00 00 00 40 00 00 00 00 00 00 00 0c 04 00 00
40: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
    Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin D routed to IRQ 12
    Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [40] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ehci_hcd
00: 22 10 95 20 06 00 30 02 02 20 03 0c 08 00 00 00
10: 00 d0 ff ef 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 95 20
30: 00 00 00 00 40 00 00 00 00 00 00 00 0c 04 00 00
40: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--------------------------- superiotool -deV
superiotool r5050
Probing for ALi Super I/O at 0x3f0...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
  PCI device 1106:0686 not found.
No Super I/O found
Best Regards
Gerd Pauli
HighConsulting GmbH & Co.KG  	Tel:    +49 821/450788 - 14
Werner-von-Siemens-Str. 6  	Fax:    +49 821/450788 - 24
86159 Augsburg   		mobile: +49 172/8150144
http://www.high-consulting.de   email:  gp@high-consulting.de
Geschäftsführer: Gerd Pauli, Dr. Walter Hafner
Amtsgericht Augsburg, HRA 16021
USt-ID: DE256906131
Persönlich haftende Gesellschafterin:
HighConsulting Management GmbH
Amtsgericht Augsburg, HRB 22745
Zur Überprüfung der verwendeten Signatur laden Sie bitte die Wurzelzertifikate von http://www.cacert.org 
Diese e-mail (incl. ggf. vorhandener Anlagen) enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese e-mail irrtümlich erhalten haben, informieren Sie bitte den Absender und vernichten Sie diese e-mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail – auch in Teilen - ist nicht gestattet.
To verify the used signature please install Root-Certificate from http://www.cacert.org 
This message (including any attachments) is confidential and may be privileged. It is intended for use by the addressee only. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorised use or dissemination of this message in whole or in part is strictly prohibited.

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

[flashrom] flashrom tested on alix2d3 board