This patch fixes some common misspellings/typos in comments. Changes generated using codespell and reviewed manually
lenght->length 2 ocassional->occasional 1 unsucessfull->unsuccessful 1 upto->up to 5
Signed-off-by: Peter Huewe peterhuewe@gmx.de --- buspirate_spi.c | 2 +- dmi.c | 2 +- serprog-protocol.txt | 2 +- serprog.c | 10 +++++----- 4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/buspirate_spi.c b/buspirate_spi.c index 3b9f487..f872309 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -203,7 +203,7 @@ int buspirate_spi_init(void) * sufficient either. Use a 1.5 ms delay inside the loop to make * mostly sure that at least one USB frame had time to arrive. * Looping only 5 times is not sufficient and causes the - * ocassional failure. + * occasional failure. * Folding the delay into the loop above is not reliable either. */ for (i = 0; i < 10; i++) { diff --git a/dmi.c b/dmi.c index cda6656..836b38b 100644 --- a/dmi.c +++ b/dmi.c @@ -119,7 +119,7 @@ static char *get_dmi_string(const char *string_name) while (!feof(dmidecode_pipe)) getc(dmidecode_pipe); if (pclose(dmidecode_pipe) != 0) { - msg_pinfo("dmidecode execution unsucessfull - continuing " + msg_pinfo("dmidecode execution unsuccessful - continuing " "without DMI info\n"); return NULL; } diff --git a/serprog-protocol.txt b/serprog-protocol.txt index c5464a4..52f901a 100644 --- a/serprog-protocol.txt +++ b/serprog-protocol.txt @@ -88,7 +88,7 @@ This define listing should help C coders - (it's here to be the single source fo #define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */ #define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */ #define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */ -#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum lenght */ +#define S_CMD_Q_WRNMAXLEN 0x08 /* Query Write to opbuf: Write-N maximum length */ #define S_CMD_R_BYTE 0x09 /* Read a single byte */ #define S_CMD_R_NBYTES 0x0A /* Read n bytes */ #define S_CMD_O_INIT 0x0B /* Initialize operation buffer */ diff --git a/serprog.c b/serprog.c index b91e376..124aa41 100644 --- a/serprog.c +++ b/serprog.c @@ -56,7 +56,7 @@ static int serprog_shutdown(void *data); #define S_CMD_Q_BUSTYPE 0x05 /* Query supported bustypes */ #define S_CMD_Q_CHIPSIZE 0x06 /* Query supported chipsize (2^n format) */ #define S_CMD_Q_OPBUF 0x07 /* Query operation buffer size */ -#define S_CMD_Q_WRNMAXLEN 0x08 /* Query opbuf-write-N maximum lenght */ +#define S_CMD_Q_WRNMAXLEN 0x08 /* Query opbuf-write-N maximum length */ #define S_CMD_R_BYTE 0x09 /* Read a single byte */ #define S_CMD_R_NBYTES 0x0A /* Read n bytes */ #define S_CMD_O_INIT 0x0B /* Initialize operation buffer */ @@ -168,9 +168,9 @@ static void sp_synchronize(void) usleep(1000 * 1000); sp_flush_incoming();
- /* Then try upto 8 times to send syncnop and get the correct special * - * return of NAK+ACK. Timing note: upto 10 characters, 10*50ms = * - * upto 500ms per try, 8*0.5s = 4s; +1s (above) = upto 5s sync * + /* Then try up to 8 times to send syncnop and get the correct special * + * return of NAK+ACK. Timing note: up to 10 characters, 10*50ms = * + * up to 500ms per try, 8*0.5s = 4s; +1s (above) = up to 5s sync * * attempt, ~1s if immediate success. */ for (i = 0; i < 8; i++) { int n; @@ -180,7 +180,7 @@ static void sp_synchronize(void) msg_pdbg("."); fflush(stdout); for (n = 0; n < 10; n++) { - c = sp_sync_read_timeout(5); /* wait upto 50ms */ + c = sp_sync_read_timeout(5); /* wait up to 50ms */ if (c != S_NAK) continue; c = sp_sync_read_timeout(2);