Am Mittwoch, den 15.12.2010, 12:32 +0100 schrieb uening@tadeus.de:
flashrom v0.9.2-r1028 on Linux 2.6.35-22-generic (i686), built with libpci 3.0.0, GCC 4.4.4, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1605M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 9992 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N68-AM Plus" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8712 Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 10de:03e1, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Guessed flash bus type is SPI Found SMBus device 10de:03eb at 00:01:1 SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 SPI control is 0x000a, enable=0, idle=0 Please send the output of "flashrom -V" to flashrom@flashrom.org to help us finish support for your chipset. Thanks. SPI on this chipset is not supported yet. OK. This chipset supports the following protocols: None. SuperI/O ID 8712 is not on the controller list.
[…]
No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.
The version of flashrom you used r1028 is outdated. Please try version 0.9.3 or preferably the latest from the repository [1].
Thanks,
Paul