Re: [flashrom] Flashrom with FTDI support

[Ohad Benjamin]

This is the output I get after compiling and trying to run flashrom.exe with the programmer connected:

flashrom v0.9.7-r1711 on Windows 6.1 (x86)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Unable to open FTDI device: -6 (ftdi_usb_reset failed).
Error: Programmer initialization failed.

This is what I get when the programmer is disconnected:

$ flashrom.exe -p ft2232_spi:type=232H
flashrom v0.9.7-r1711 on Windows 6.1 (x86)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Unable to open FTDI device: -3 (device not found).
Error: Programmer initialization failed.

Thank you,

Ohad Benjamin, Sr. Embedded SW Engineer
Office: [phone] ext 122 | Fax: [phone]
[e-mail] | www.panpwr.com

-----Original Message-----
From: Stefan Tauner [mailto:[e-mail]] 
Sent: 20 December, 2014 17:02
To: Ohad Benjamin
Cc: [e-mail]
Subject: Re: [flashrom] Flashrom with FTDI support

On Thu, 18 Dec 2014 15:10:13 +0000
Ohad Benjamin  wrote:
> I tried compiling my own version from source, but the output could not communicate with the FTDI port.

Hello Ohad,

I'd focus on that part because from that description alone I suppose another binary would have the same problems. Please describe your symptoms and post a verbose flashrom log.