Re: [flashrom] Support for Winbond W25Q256JVFQ

[Michael Fuckner]

On 12/19/2017 01:31 AM, Nico Huber wrote:
> Hi Michael,
>
> On 18.12.2017 20:18, Michael Fuckner wrote:
> > Hi,
> >
> > I noticed W25Q256FV is supported by flashrom, but I'd like to reflash
> > W25Q256JVFQ (used by Supermicro X11DAi-N). It also uses ID 4019, but
> > does not support QPI.
> >
> > My programmer is a custom board connected to a Raspi3 using SPI
> > interface. Any idea how to get it running?
>
> if you look close at your log, you'll see that flashrom reads the ID
> shifted by one bit. You probably just have to reduce the speed. See
> flashrom's manual page about the linux_spi driver, it has a parameter
> called `spispeed`.

Hi,

maybe spispeed=512 is way too slow, but it worked! Both Boards are up 
and running again, THANK YOU!

Regards,
  Michael!