Hi list,
I modified the rayer spi programmer source to be used with a Xilinx parallel III (also called DLC5) programmer cable.
It's a trivial change of parallel port pins, but I did not know how the support for this cable should be included into the source code. Copying the same code to a separate file may not be a good idea.
--- flashrom/rayer_spi.c 2010-09-18 19:48:27.000000000 +0200 +++ ../flashrom/rayer_spi.c 2010-09-18 02:12:59.000000000 +0200 @@ -37,11 +37,11 @@ * independent and are bitshift values, not real pin numbers. */ /* Pins for master->slave direction */ -#define SPI_CS_PIN 5 -#define SPI_SCK_PIN 6 -#define SPI_MOSI_PIN 7 +#define SPI_CS_PIN 2 +#define SPI_SCK_PIN 1 +#define SPI_MOSI_PIN 0 /* Pins for slave->master direction */ -#define SPI_MISO_PIN 6 +#define SPI_MISO_PIN 4
static int lpt_iobase;
Thank you for working on this software, with access to the source code I was able to program my w25q64 flash chip.