This includes not only the notorious read-only flash descriptors and locked ME regions, but also the more rarely used PRs (Protected Ranges). The user can enforce write support by specifying ich_spi_force=yes in the programmer options, but we don't tell him the exact syntax interactively. He has to read it up in the man page.
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net --- flashrom.8 | 15 ++++++++++ ichspi.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++-------------- 2 files changed, 82 insertions(+), 20 deletions(-)
diff --git a/flashrom.8 b/flashrom.8 index e5f9a29..76aacba 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -315,6 +315,21 @@ important opcodes are inaccessible due to lockdown; or if more than one flash chip is attached). The other options (swseq, hwseq) select the respective mode (if possible). .sp +ICH8 and later southbridges may also have locked address ranges of different +kinds if a valid descriptor was written to it. The flash address space is then +partitioned in multiple so called "Flash Regions" containing the host firmware, +the ME firmware and so on respectively. The flash descriptor can also specify up +to 5 so called "Protected Regions", which are freely chosen address ranges +independent from the aforementioned "Flash Regions". All of them can be write +and/or read protected individually. If flashrom detects such a lock it will +disable write support unless the user forces it with the +.sp +.B " flashrom -p internal:ich_spi_force=yes" +.sp +syntax. If this leads to erase or write accesses to the flash it would most +probably bring it into an inconsistent and unbootable state and we will not +provide any support in such a case. +.sp If you have an Intel chipset with an ICH6 or later southbridge and if you want to set specific IDSEL values for a non-default flash chip or an embedded controller (EC), you can use the diff --git a/ichspi.c b/ichspi.c index 163ecf1..711f46c 100644 --- a/ichspi.c +++ b/ichspi.c @@ -1421,7 +1421,8 @@ static int ich_spi_send_multicommand(struct flashctx *flash, #define ICH_BRWA(x) ((x >> 8) & 0xff) #define ICH_BRRA(x) ((x >> 0) & 0xff)
-static void do_ich9_spi_frap(uint32_t frap, int i) +/* returns 0 if region is unused or r/w */ +static int ich9_handle_frap(uint32_t frap, int i) { static const char *const access_names[4] = { "locked", "read-only", "write-only", "read-write" @@ -1444,11 +1445,16 @@ static void do_ich9_spi_frap(uint32_t frap, int i) if (base > limit) { /* this FREG is disabled */ msg_pdbg("%s region is unused.\n", region_names[i]); - return; + return 0; }
- msg_pdbg("0x%08x-0x%08x is %s\n", base, (limit | 0x0fff), + msg_pdbg("0x%08x-0x%08x is %s.\n", base, (limit | 0x0fff), access_names[rwperms]); + if (rwperms == 0x3) + return 0; + + msg_pinfo("WARNING: %s region is not fully accessible.\n", region_names[i]); + return 1; }
/* In contrast to FRAP and the master section of the descriptor the bits @@ -1460,21 +1466,25 @@ static void do_ich9_spi_frap(uint32_t frap, int i) #define ICH_PR_PERMS(pr) (((~((pr) >> PR_RP_OFF) & 1) << 0) | \ ((~((pr) >> PR_WP_OFF) & 1) << 1))
-static void prettyprint_ich9_reg_pr(int i) +/* returns 0 if range is unused (i.e. r/w) */ +static int ich9_handle_pr(int i) { - static const char *const access_names[4] = { - "locked", "read-only", "write-only", "read-write" + static const char *const access_names[3] = { + "locked", "read-only", "write-only" }; uint8_t off = ICH9_REG_PR0 + (i * 4); uint32_t pr = mmio_readl(ich_spibar + off); - int rwperms = ICH_PR_PERMS(pr); + unsigned int rwperms = ICH_PR_PERMS(pr);
- msg_pdbg2("0x%02X: 0x%08x (PR%u", off, pr, i); - if (rwperms != 0x3) - msg_pdbg2(")\n0x%08x-0x%08x is %s\n", ICH_FREG_BASE(pr), - ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]); - else - msg_pdbg2(", unused)\n"); + if (rwperms == 0x3) { + msg_pdbg2("0x%02X: 0x%08x (PR%u is unused)\n", off, pr, i); + return 0; + } + + msg_pdbg("0x%02X: 0x%08x ", off, pr); + msg_pinfo("WARNING: PR%u: 0x%08x-0x%08x is %s.\n", i, ICH_FREG_BASE(pr), + ICH_FREG_LIMIT(pr) | 0x0fff, access_names[rwperms]); + return 1; }
/* Set/Clear the read and write protection enable bits of PR register @i @@ -1537,6 +1547,8 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, uint16_t spibar_offset, tmp2; uint32_t tmp; char *arg; + int ich_spi_force = 0; + int ich_spi_has_locks = 0; int desc_valid = 0; struct ich_descriptors desc = {{ 0 }}; enum ich_spi_mode { @@ -1631,6 +1643,22 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, } free(arg);
+ arg = extract_programmer_param("ich_spi_force"); + if (arg && !strcmp(arg, "yes")) { + ich_spi_force = 1; + msg_pspew("ich_spi_force enabled.\n"); + } else if (arg && !strlen(arg)) { + msg_perr("Missing argument for ich_spi_force.\n"); + free(arg); + return ERROR_FATAL; + } else if (arg) { + msg_perr("Unknown argument for ich_spi_force: "%s" " + "(not "yes").\n", arg); + free(arg); + return ERROR_FATAL; + } + free(arg); + tmp2 = mmio_readw(ich_spibar + ICH9_REG_HSFS); msg_pdbg("0x04: 0x%04x (HSFS)\n", tmp2); prettyprint_ich9_reg_hsfs(tmp2); @@ -1665,17 +1693,36 @@ int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, msg_pdbg("BRWA 0x%02x, ", ICH_BRWA(tmp)); msg_pdbg("BRRA 0x%02x\n", ICH_BRRA(tmp));
- /* Decode and print FREGx and FRAP registers */ + /* Handle FREGx and FRAP registers */ for (i = 0; i < 5; i++) - do_ich9_spi_frap(tmp, i); + ich_spi_has_locks |= ich9_handle_frap(tmp, i); }
- /* try to disable PR locks before printing them */ - if (!ichspi_lock) - for (i = 0; i < 5; i++) + for (i = 0; i < 5; i++) { + /* if not locked down try to disable PR locks first */ + if (!ichspi_lock) ich9_set_pr(i, 0, 0); - for (i = 0; i < 5; i++) - prettyprint_ich9_reg_pr(i); + ich_spi_has_locks |= ich9_handle_pr(i); + } + + if (ich_spi_has_locks) { + msg_pinfo("Please send a verbose log to " + "flashrom@flashrom.org if this board is not " + "listed on\n" + "http://flashrom.org/Supported_hardware#Supported_mainboards " + "yet.\n"); + if (!ich_spi_force) + programmer_may_write = 0; + msg_pinfo("Writes have been disabled. You can enforce " + "write support with the\nich_spi_force " + "programmer option, but it will most likely " + "harm your hardware!\nIf you force flashrom " + "you will get no support if something " + "breaks.\n"); + if (ich_spi_force) + msg_pinfo("Continuing with write support " + "because the user forced us to!\n"); + }
tmp = mmio_readl(ich_spibar + ICH9_REG_SSFS); msg_pdbg("0x90: 0x%02x (SSFS)\n", tmp & 0xff);