[flashrom] [commit] r1389 - trunk

[repository service]

Author: hailfinger
Date: Tue Jul 26 00:44:09 2011
New Revision: 1389
URL: http://flashrom.org/trac/flashrom/changeset/1389

Log:
Fix ICH FWH IDSEL setting with the fwh_idsel= internal programmer
parameter.
The code took 32 bits of input and wrote them to an 48 bit register,
duplicating some values.
Document the fwh_idsel= parameter in the man page.

Signed-off-by: Carl-Daniel Hailfinger 
Acked-by: Stefan Tauner

Modified:
   trunk/chipset_enable.c
   trunk/flashrom.8

Modified: trunk/chipset_enable.c
==============================================================================
--- trunk/chipset_enable.c	Tue Jul 26 00:07:05 2011	(r1388)
+++ trunk/chipset_enable.c	Tue Jul 26 00:44:09 2011	(r1389)
@@ -30,6 +30,8 @@
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
+#include <inttypes.h>
+#include <errno.h>
 #include "flash.h"
 #include "programmer.h"

@@ -311,15 +313,33 @@

idsel = extract_programmer_param("fwh_idsel");
    if (idsel && strlen(idsel)) {
-		fwh_conf = (uint32_t)strtoul(idsel, NULL, 0);
-
-		/* FIXME: Need to undo this on shutdown. */
-		msg_pinfo("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf);
-		rpci_write_long(dev, 0xd0, fwh_conf);
-		rpci_write_word(dev, 0xd4, fwh_conf);
+		uint64_t fwh_idsel_old;
+		uint64_t fwh_idsel;
+		errno = 0;
+		/* Base 16, nothing else makes sense. */
+		fwh_idsel = (uint64_t)strtoull(idsel, NULL, 16);
+		if (errno) {
+			msg_perr("Error: fwh_idsel= specified, but value could "
+				 "not be converted.\n");
+			goto idsel_garbage_out;
+		}
+		if (fwh_idsel & 0xffff000000000000ULL) {
+			msg_perr("Error: fwh_idsel= specified, but value had "
+				 "unusued bits set.\n");
+			goto idsel_garbage_out;
+		}
+		fwh_idsel_old = pci_read_long(dev, 0xd0);
+		fwh_idsel_old <<= 16;
+		fwh_idsel_old |= pci_read_word(dev, 0xd4);
+		msg_pdbg("\nSetting IDSEL from 0x%012" PRIx64 " to "
+			 "0x%012" PRIx64 " for top 16 MB.", fwh_idsel_old,
+			 fwh_idsel);
+		rpci_write_long(dev, 0xd0, (fwh_idsel >> 16) & 0xffffffff);
+		rpci_write_word(dev, 0xd4, fwh_idsel & 0xffff);
    	/* FIXME: Decode settings are not changed. */
    } else if (idsel) {
-		msg_perr("Error: idsel= specified, but no number given.\n");
+		msg_perr("Error: fwh_idsel= specified, but no value given.\n");
+idsel_garbage_out:	
    	free(idsel);
    	/* FIXME: Return failure here once internal_init() starts
    	 * to care about the return value of the chipset enable.

Modified: trunk/flashrom.8
==============================================================================
--- trunk/flashrom.8	Tue Jul 26 00:07:05 2011	(r1388)
+++ trunk/flashrom.8	Tue Jul 26 00:44:09 2011	(r1389)
@@ -299,6 +299,23 @@
 flashrom doesn't detect an active IT87 LPC<->SPI bridge, please send a bug
 report so we can diagnose the problem.
 .sp
+If you have an Intel chipset with an ICH6 or later southbridge and if you want
+to set specific IDSEL values for a non-default flash chip or an embedded
+controller (EC), you can use the
+.sp
+.B "  flashrom -p internal:fwh_idsel=value"
+.sp
+syntax where value is the 48-bit hexadecimal raw value to be written in the
+IDSEL registers of the Intel southbridge. The upper 32 bits use one hex digit
+each per 512 kB range between 0xffc00000 and 0xffffffff, and the lower 16 bits
+use one hex digit each per 1024 kB range between 0xff400000 and 0xff7fffff.
+The rightmost hex digit corresponds with the lowest address range. All address
+ranges have a corresponding sister range 4 MB below with identical IDSEL
+settings. The default value for ICH7 is given in the example below.
+.sp
+Example:
+.B "flashrom -p internal:fwh_idsel=0x001122334567"
+.sp
 Using flashrom on laptops is dangerous and may easily make your hardware
 unusable (see also the
 .B BUGS