Author: stefanct Date: Sat Oct 26 19:02:03 2013 New Revision: 1762 URL: http://flashrom.org/trac/flashrom/changeset/1762
Log: Add board enable for abit BF6.
Because the board does not have any PCI subsystem IDs set and the DMI strings are not very specific at all, autodetection has been disabled. The GPIO was found by roxfan and the patch tested on hardware by Gelip, thanks!
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Acked-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at
Modified: trunk/board_enable.c trunk/print.c
Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Fri Oct 25 02:33:37 2013 (r1761) +++ trunk/board_enable.c Sat Oct 26 19:02:03 2013 (r1762) @@ -2266,13 +2266,13 @@ * NOTE: Please add boards that _don't_ need such enables or don't work yet * to the respective tables in print.c. Thanks! * - * We use 2 sets of IDs here, you're free to choose which is which. This + * We use 2 sets of PCI IDs here, you're free to choose which is which. This * is to provide a very high degree of certainty when matching a board on * the basis of subsystem/card IDs. As not every vendor handles * subsystem/card IDs in a sane manner. * * Keep the second set NULLed if it should be ignored. Keep the subsystem IDs - * NULLed if they don't identify the board fully and if you can't use DMI. + * and the dmi identifier NULLed if they don't identify the board fully to disable autodetection. * But please take care to provide an as complete set of pci ids as possible; * autodetection is the preferred behaviour and we would like to make sure that * matches are unique. @@ -2306,6 +2306,7 @@ #if defined(__i386__) || defined(__x86_64__) {0x10DE, 0x0547, 0x147B, 0x1C2F, 0x10DE, 0x0548, 0x147B, 0x1C2F, NULL, NULL, NULL, P3, "abit", "AN-M2", 0, NT, nvidia_mcp_gpio2_raise}, {0x1106, 0x0282, 0x147B, 0x1415, 0x1106, 0x3227, 0x147B, 0x1415, "^AV8 ", NULL, NULL, P3, "abit", "AV8", 0, OK, board_abit_av8}, + {0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, NULL /* "^I440BX-W977$" */, "abit", "bf6", P3, "abit", "BF6", 0, OK, intel_piix4_gpo26_lower}, {0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^i440BX-W977 (BM6)$", NULL, NULL, P3, "abit", "BM6", 0, OK, intel_piix4_gpo26_lower}, {0x8086, 0x24d3, 0x147b, 0x1014, 0x8086, 0x2578, 0x147b, 0x1014, NULL, NULL, NULL, P3, "abit", "IC7", 0, NT, intel_ich_gpio23_raise}, {0x8086, 0x2930, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, P3, "abit", "IP35", 0, OK, intel_ich_gpio16_raise},
Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Oct 25 02:33:37 2013 (r1761) +++ trunk/print.c Sat Oct 26 19:02:03 2013 (r1762) @@ -530,6 +530,7 @@ B("abit", "AN-M2", OK, NULL, NULL), B("abit", "AV8", OK, NULL, NULL), B("abit", "AX8", OK, NULL, NULL), + B("abit", "BF6", OK, NULL, NULL), B("abit", "BM6", OK, NULL, NULL), B("abit", "Fatal1ty F-I90HD", OK, NULL, NULL), B("abit", "IC7", OK, NULL, NULL),