On 14.09.2010 12:27, Peter Lemenkov wrote:
2010/9/14 Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net:
Could you please attach "superiotool -deV" output as well?
Heh, seems that I attached wrong file by mistake. See attached file.
Thanks. It seems superiotool output is completely useless (not your fault). The Super I/O seems to be unsupported by superiotool. The manual says this is a NS PC97317VUL Super I/O Chip. Datasheet is here: http://www.alldatasheet.com/datasheet-pdf/pdf/9317/NSC/PC87317.html (look for SID to find the identification data).
The block diagram in the board manual suggests that the flash chip is a 4 Mbit device directly attached to the ISA bus.
And would it be possible for you to take a look inside the machine to check which flash chip it is? Thanks!
Nope, I cant look inside.
OK. The board has a "JP1 firmware write protect" jumper, so writing would probably be impossible without opening the case. It _is_ possible that this jumper also prevents probing, but I'm not so sure about that.
Regards, Carl-Daniel