[flashrom] [PATCH] More verbose failures for SPI commands

[Carl-Daniel Hailfinger]

If a SPI command taking an address does fail, we want to know the
address for easier debugging.

Signed-off-by: Carl-Daniel Hailfinger

Index: flashrom-spi_command_failure_verbose/spi.c
===================================================================
--- flashrom-spi_command_failure_verbose/spi.c	(Revision 763)
+++ flashrom-spi_command_failure_verbose/spi.c	(Arbeitskopie)
@@ -615,8 +615,8 @@

result = spi_send_multicommand(cmds);
    if (result) {
-		fprintf(stderr, "%s failed during command execution\n",
-			__func__);
+		fprintf(stderr, "%s failed during command execution at address 0x%x\n",
+			__func__, addr);
    	return result;
    }
    /* Wait until the Write-In-Progress bit is cleared.
@@ -659,7 +659,8 @@

result = spi_send_multicommand(cmds);
    if (result) {
-		fprintf(stderr, "%s failed during command execution\n", __func__);
+		fprintf(stderr, "%s failed during command execution at address 0x%x\n",
+			__func__, addr);
    	return result;
    }
    /* Wait until the Write-In-Progress bit is cleared.
@@ -721,8 +722,8 @@

result = spi_send_multicommand(cmds);
    if (result) {
-		fprintf(stderr, "%s failed during command execution\n",
-			__func__);
+		fprintf(stderr, "%s failed during command execution at address 0x%x\n",
+			__func__, addr);
    	return result;
    }
    /* Wait until the Write-In-Progress bit is cleared.
@@ -827,21 +828,21 @@

result = spi_send_multicommand(cmds);
    if (result) {
-		fprintf(stderr, "%s failed during command execution\n",
-			__func__);
+		fprintf(stderr, "%s failed during command execution at address 0x%x\n",
+			__func__, addr);
    }
    return result;
 }

-int spi_nbyte_program(int address, uint8_t *bytes, int len)
+int spi_nbyte_program(int addr, uint8_t *bytes, int len)
 {
    int result;
    /* FIXME: Switch to malloc based on len unless that kills speed. */
    unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = {
    	JEDEC_BYTE_PROGRAM,
-		(address >> 16) & 0xff,
-		(address >> 8) & 0xff,
-		(address >> 0) & 0xff,
+		(addr >> 16) & 0xff,
+		(addr >> 8) & 0xff,
+		(addr >> 0) & 0xff,
    };
    struct spi_command cmds[] = {
    {
@@ -874,8 +875,8 @@

result = spi_send_multicommand(cmds);
    if (result) {
-		fprintf(stderr, "%s failed during command execution\n",
-			__func__);
+		fprintf(stderr, "%s failed during command execution at address 0x%x\n",
+			__func__, addr);
    }
    return result;
 }