On Thu, Jul 15, 2010 at 10:03:36AM -0400, Joshua Roys wrote:
On 07/15/2010 06:51 AM, Mattias Mattsson wrote:
I'm trying latest flashrom (r1082) an an Intel SE440BX. No flashchip is detected. I also tried to reuse the SE440BX-2 board enable but couldn't make it work.
The flash on the board is an Intel E28F002BC-T80. Datasheet here: http://www.ezoflash.com/datasheets/flash/Intel/28F002BC.pdf
I would like to add the chip to flashchips.c but was unsure how to interpret the datasheet and the corresponding values for probe/read/write function.
Logs attached
Can you please try the attached patch? Please do a `flashrom -V' after and see if the chip is detected, and reply with that log. If you want to try a write, make sure you have a backup ready and time to spend fixing it in case it doesn't work (another patch may be needed to enable writing).
I'm sorry to say that the chip is not detected. (I actually tried a very similar if not identical patch myself before sending my mail).
For completeness, log attached.
-mattias