Hello,
Definitions for 40B/80B are merged with their non-B counterparts, defines for 10B/20B are added in header, and support for 05B is added (untested, chip not in samples).
Signed-off-by: Hatim Kanchwala hatim@hatimak.me --- flashchips.c | 135 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- flashchips.h | 7 +++- 2 files changed, 136 insertions(+), 6 deletions(-)
diff --git a/flashchips.c b/flashchips.c index 0fc1b7a..3235b59 100644 --- a/flashchips.c +++ b/flashchips.c @@ -5628,37 +5628,162 @@ const struct flashchip flashchips[] = { {16 * 1024, 1}, }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, /* Supports a fast mode too */ .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ },
{ .vendor = "GigaDevice", - .name = "GD25LQ40", + .name = "GD25LQ05B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25LQ05B, + .total_size = 64, + .page_size = 256, + /* Supports SFDP */ + /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd status reg (read 0x35); 3rd status reg (read 0x15) */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 2100}, + }, + + + { + .vendor = "GigaDevice", + .name = "GD25LQ10B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25LQ10B, + .total_size = 128, + .page_size = 256, + /* Supports SFDP */ + /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd status reg (read 0x35); 3rd status reg (read 0x15) */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 2100}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25LQ20B", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25LQ20B, + .total_size = 256, + .page_size = 256, + /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: 2nd status reg (read 0x35); 3rd status reg (read 0x15) */ + .printlock = spi_prettyprint_status_register_bp4_srwd, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {1650, 2100}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25LQ40(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ40, .total_size = 512, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + /* OTP (GD25LQ40): 1024B total, 256B reserved; read 0x48, write 0x42, erase 0x44 */ + /* OTP (GD25LQ40B): 1536B total; read 0x48, write 0x42, erase 0x44 */ + /* GD25LQ40B supports SFDP */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, @@ -5667,37 +5792,39 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, },
{ .vendor = "GigaDevice", - .name = "GD25LQ80", + .name = "GD25LQ80(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ80, .total_size = 1024, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + /* OTP (GD25LQ80): 1024B total, 256B reserved; read 0x48, write 0x42, erase 0x44 */ + /* OTP (GD25LQ80B): 1536B total; read 0x48, write 0x42, erase 0x44 */ + /* GD25LQ80B supports SFDP */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, diff --git a/flashchips.h b/flashchips.h index 9ffb30f..07abd74 100644 --- a/flashchips.h +++ b/flashchips.h @@ -364,32 +364,35 @@ #define GIGADEVICE_ID 0xC8 /* GigaDevice */ #define GIGADEVICE_GD25T80 0x3114 #define GIGADEVICE_GD25Q512 0x4010 #define GIGADEVICE_GD25Q10 0x4011 #define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */ #define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */ #define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ #define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B and GD25Q128C only, can be distinguished by SFDP */ #define GIGADEVICE_GD25VQ21B 0x4212 #define GIGADEVICE_GD25VQ41B 0x4213 /* Same as GD25VQ40C, can be distinguished by SFDP */ #define GIGADEVICE_GD25VQ80C 0x4214 #define GIGADEVICE_GD25VQ16C 0x4215 -#define GIGADEVICE_GD25LQ40 0x6013 -#define GIGADEVICE_GD25LQ80 0x6014 +#define GIGADEVICE_GD25LQ05B 0x6010 +#define GIGADEVICE_GD25LQ10B 0x6011 +#define GIGADEVICE_GD25LQ20B 0x6012 +#define GIGADEVICE_GD25LQ40 0x6013 /* Same as GD25LQ40B, can be distinguished by SFDP */ +#define GIGADEVICE_GD25LQ80 0x6014 /* Same as GD25LQ80B, can be distinguished by SFDP */ #define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 #define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ #define GIGADEVICE_GD25LQ128 0x6018 #define GIGADEVICE_GD29GL064CAB 0x7E0601
#define HYUNDAI_ID 0xAD /* Hyundai */ #define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */ #define HYUNDAI_HY29F800B 0x58 /* Same as HY29F800AB */ #define HYUNDAI_HY29LV800B 0x5B #define HYUNDAI_HY29F040A 0xA4 #define HYUNDAI_HY29F400B 0xAB /* Same as HY29F400AB */ #define HYUNDAI_HY29F002B 0x34 #define HYUNDAI_HY29F002T 0xB0 #define HYUNDAI_HY29LV400T 0xB9