Hi all,
I have a lot of supermicro boards/ systems at hand and I first tried it this morning and it worked with X8DTE-F, so it will most likely also work with X8DT6 (same bios file). Do you also need flashrom -V or -z?
I hope I have some time to test other boards available.
Regards, Michael!
test131:/media/flashrom # ./flashrom -w ~/x8dt61.830 flashrom v0.9.4-r1470 on Linux 3.1.0-1.2-default (x86_64), built with libpci 3.1.7, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "Intel ICH10R". Enabling flash write... OK. Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. test131:/media/flashrom #