On Mon, 15 Jul 2013 10:35:02 +0200 Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net wrote:
Am 10.07.2013 21:17 schrieb Stefan Tauner:
With every newly supported programmer the information regarding reboots on failures becomes more ridiculous. With this patch it is only shown when the internal programmer module was selected.
Example outputs for external programmers:
- non-fatal:
[…] Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x28, failed byte count from 0x00000000-0x0001ffff: 0x1fde7 ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!
- fatal:
[…] Verifying flash... FAILED at 0x00000000! Expected=0x0f, Found=0xff, failed byte count from 0x00000000-0x0001ffff: 0x1fde6 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at Acked-by: David Hendricks dhendrix@google.com
Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
thanks, r1699.