2011/1/13 Illarion Borisochkin 958@mail.ru
Hello! Need Help!
Hi, do not despair.
BIOS: ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5P800/P5P80014.zip
flashrom -w P5P80014.ROM flashrom v0.9.3-r1205 on FreeBSD 7.4-PRERELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD], little endian flashrom is free software, get the source code at http://www.flashrom.org
If I still had a 7.4 machine I would compile a patched binary for you, unfortunately I don't -- 8.1 only).
Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: FWH. Found chip "Winbond W39V040FA" (512 KB, FWH) at physical address 0xfff80000.
Can you checkout current development code, apply and try the applied patch ? It should enable erasing/writing your chip, Winbond W39V040FA. The source code can be found here: http://www.flashrom.org/Downloads#Installation_from_source You can skip the installation part. Just run flashrom, as root, from its build directory: "./flashrom"
Commit message:
Add erasing/writing functionality to Winbond W39V040FA and Winbond W39V040FC, rename unlock_w39v040fb() to unlock_w39v040fa_fb_fc(). Marked the W39V040FA as untested: TEST_OK_PR Not yet tested (on hardware) for the W39V040FA, untested for the W39V040FC.
Signed-off-by: Idwer Vollering vidwer@gmail.com
---
When this patch is tested, the erase/write status for the W39V040FA requires updating.
Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00004560! Expected=0xff, Read=0x4c, failed byte count from 0x00004000-0x00004fff: 0xa7f ERASE FAILED! ERASE FAILED at 0x00004560! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x0000ffff: 0xb9df ERASE FAILED! ERASE FAILED at 0x00004560! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x0007ffff: 0x78040 ERASE FAILED! FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with FAILED: your board name in the subject line!
DO NOT REBOOT OR POWEROFF!
flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom