Hi,
just tried it- this Board uses a Winbond 25Q64FV (64Mbit) and after reading there is an 8MB file, but it is empty. Anything else I should try?
molli123@revo:~/beta/flashrom > xxd flash.bin | head -n 5 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 00000010: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 00000020: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 00000030: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 00000040: 0000 0000 0000 0000 0000 0000 0000 0000 ................
Regards, Michael!
On 3/22/2017 1:08 PM, Nico Huber wrote:
Hi Michael,
On 21.03.2017 20:48, Michael Fuckner wrote:
Hi,
I added PCI ID for my chipset, but I can't access/ read FLash chip. Any idea how to proceed?
if you compare the datasheets, you'll see that it's incompatible with the 9series PCH.
I'm currently working on upstream support for the Sunrise Point PCH [1]. It's not working yet on my system. But if you want to try it out / help me debugging remaining issues, here's how you can fetch the code:
$ git clone https://review.coreboot.org/flashrom $ cd flashrom $ git fetch https://review.coreboot.org/flashrom refs/changes/40/18940/1 && git checkout FETCH_HEAD
You'd still have to set your chipset to NT instead of BAD in chipset_enable.c.
Nico
PS. You can also try the chromiumos fork of flashrom (can't give you build instructions though).
[1] Tip of my branch: https://review.coreboot.org/#/c/18940/
Regards, Michael!
[root@revo flashrom]# diff chipset_enable.c.bak chipset_enable.c 1783a1784
{0x8086, 0xa144, NT, "Intel", "Sunrise Point-H",enable_flash_pch9},
[root@revo flashrom]# ./flashrom -V -p internal flashrom v0.9.9-r1954 on Linux 4.9.13-201.fc25.x86_64 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.4, GCC 6.3.1 20161221 (Red Hat 6.3.1-1), little endian Command line (3 args): ./flashrom -V -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 2789M loops per second, 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 1014 us, 10000 myus = 10007 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Shuttle Inc." DMI string system-product-name: "XH170" DMI string system-version: "V1.0" DMI string baseboard-manufacturer: "Shuttle Inc." DMI string baseboard-product-name: "FH170" DMI string baseboard-version: "1.0" Found ITE Super I/O, ID 0x8772 on port 0x2e Found chipset "Intel Sunrise Point-H" with PCI ID 8086:a144. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0x0 Error accessing ICH RCRB, 0x4000 bytes at 0x0000000000000000 /dev/mem mmap failed: Resource temporarily unavailable FAILED! FATAL ERROR! Error: Programmer initialization failed.
flashrom mailing list flashrom@flashrom.org https://www.flashrom.org/mailman/listinfo/flashrom