Hi,
I added PCI ID for my chipset, but I can't access/ read FLash chip. Any idea how to proceed?
Regards, Michael!
[root@revo flashrom]# diff chipset_enable.c.bak chipset_enable.c 1783a1784
{0x8086, 0xa144, NT, "Intel", "Sunrise Point-H",
enable_flash_pch9}, -------------------------------------------------------
[root@revo flashrom]# ./flashrom -V -p internal flashrom v0.9.9-r1954 on Linux 4.9.13-201.fc25.x86_64 (x86_64) flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.4, GCC 6.3.1 20161221 (Red Hat 6.3.1-1), little endian Command line (3 args): ./flashrom -V -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 2789M loops per second, 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 1014 us, 10000 myus = 10007 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Shuttle Inc." DMI string system-product-name: "XH170" DMI string system-version: "V1.0" DMI string baseboard-manufacturer: "Shuttle Inc." DMI string baseboard-product-name: "FH170" DMI string baseboard-version: "1.0" Found ITE Super I/O, ID 0x8772 on port 0x2e Found chipset "Intel Sunrise Point-H" with PCI ID 8086:a144. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0x0 Error accessing ICH RCRB, 0x4000 bytes at 0x0000000000000000 /dev/mem mmap failed: Resource temporarily unavailable FAILED! FATAL ERROR! Error: Programmer initialization failed.