Alright, will do.
On Sun, Aug 21, 2011 at 1:24 PM, Stefan Tauner < stefan.tauner@student.tuwien.ac.at> wrote:
On Sun, 21 Aug 2011 08:40:54 -0600 Donovan Lavinder drmario2007@gmail.com wrote:
here's the log:
;root@sysresccd /root % flashrom ;flashrom v0.9.3-r1205 on Linux 2.6.38-std230-i586 (i686), built with
libpci
3.1. ;7, GCC 4.4.5, little endian ;flashrom is free software, get the source code at
; ; ;Calibrating delay loop... OK. ;coreboot table found at 0x6fffe000. ;Found ITE Super I/O, ID 0x8718. ;Found Chipset "AMD SB700/SB710/SB750", enabling flash write... OK. ;This chipset supports the following protocols: LPC,FWH,SPI. ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;4 byte RDID not supported on this SPI controller ;
After that, that's it....
a verbose one (with -V or even -VVV) please i am not familiar with the it87xx code, but i would say it hangs in the while loop at the end of it8716f_spi_send_command. it would be easy to add a timeout there, but the question is why it does hang there (now).
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner