lspci/superiotool: http://www.coreboot.org/pipermail/flashrom/2010-August/004436.html
This goes the safe route of adding a match for the P4P800 that does not match the P4P800-E Deluxe which is already in. It seems quite likely that the whole P4P800 family could use the same board enable with one generic board enable match, though.
This match uses host bridge + audio, because all other IDs match the P4P800-E Deluxe board, as reported in http://www.e-monkeys.de/Everest-Bericht.txt
Signed-off-by: Michael Karcher flashrom@mkarcher.dialup.fu-berlin.de --- board_enable.c | 2 ++ print.c | 1 + 2 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/board_enable.c b/board_enable.c index 5e0294b..d6da14b 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1315,6 +1315,7 @@ static int intel_ich_gpio19_raise(void) * Suited for: * - ASUS P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2 * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5 + * - ASUS P4P800: Intel socket478 + 865PE + ICH5R * - ASUS P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R * - ASUS P5PE-VM: Intel LGA775 + 865G + ICH5 * - Samsung Polaris 32: socket478 + 865P + ICH5 @@ -1768,6 +1769,7 @@ const struct board_pciid_enable board_pciid_enables[] = { {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8088, 0x8086, 0x24C3, 0x1043, 0x8089, NULL, NULL, NULL, "ASUS", "P4B533-E", 0, NT, intel_ich_gpio22_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x2570, 0x1043, 0x80F2, 0x8086, 0x24D5, 0x1043, 0x80F3, NULL, NULL, NULL, "ASUS", "P4P800", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, diff --git a/print.c b/print.c index d8ba1ec..d48b7fb 100644 --- a/print.c +++ b/print.c @@ -348,6 +348,7 @@ const struct board_info boards_known[] = { B("ASUS", "P4B266", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL), B("ASUS", "P4B266-LM", 1, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL), B("ASUS", "P4C800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK", NULL), + B("ASUS", "P4P800", 1, "http://www.asus.com/product.aspx?P_ID=DYt1Et9MlBChqzLb", NULL), B("ASUS", "P4P800-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g", NULL), B("ASUS", "P4SD-LA", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL), B("ASUS", "P5A", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),