Hi Stefan,
Thanks for the response. I have tried adding support for Rangeley following the spec. Attached the patch. But, flashrom -E is failing with below error messages
Pasting only the failure messages: .. ... Erasing and writing flash chip... spi_block_erase_20 failed during command execution at address 0x0 Reading current flash chip contents... done. FAILED at 0x00010000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0003ffff: 0x30000 ERASE FAILED! Reading current flash chip contents... done. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. spi_chip_erase_c7 failed during command execution FAILED! Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!
Thanks & Regards, Rajasekhar
On Tue, Apr 22, 2014 at 12:38 AM, Stefan Tauner < stefan.tauner@student.tuwien.ac.at> wrote:
On Mon, 21 Apr 2014 19:04:18 +0530 Rajasekhar Pulluru pullururajasekhar@gmail.com wrote:
Hi Flashrom team,
Has any one tried adding support for Intel's Avoton/C2000 platform.
Hi,
well, I have started a patch a while ago, but it is more or less just a (wrong?) stub yet. And I dont have hardware to test... but you can probably at least take the PCI ID list :) https://github.com/stefanct/flashrom/compare/master...c2000
You probably want to take a look at google's chromiumos fork of flashrom and base your patch on top of that because it has support for bailtrail which I think is similar. I plan to port the bailtrail support soonish, but it will take at least a few weeks. Looking forward to other contributions though ;)
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner