[flashrom] [commit] r1377 - trunk

[repository service]

Author: uwe
Date: Thu Jul 21 11:18:18 2011
New Revision: 1377
URL: http://flashrom.org/trac/flashrom/changeset/1377

Log:
ft2232_spi: Improve error handling, remove exit() calls.

In order to make the ft2232_spi code more usable in libflashrom (e.g. from
frontends/GUIs) there must not be any exit() calls in the code, as that
would also terminate the frontend. Thus, replace all exit() calls with
proper error handling code by returning a _unique_ negative error number,
so that the frontend (and/or user/developer) can also know a bit more
exactly _which_ error occured, not only _that_ an error occured.

Also, call ftdi_usb_close() before returning due to errors.

Signed-off-by: Uwe Hermann 
Acked-by: Tadas Slotkus

Modified:
   trunk/ft2232_spi.c

Modified: trunk/ft2232_spi.c
==============================================================================
--- trunk/ft2232_spi.c	Wed Jul 20 18:34:18 2011	(r1376)
+++ trunk/ft2232_spi.c	Thu Jul 21 11:18:18 2011	(r1377)
@@ -150,9 +150,10 @@
    .write_256 = default_spi_write_256,
 };

+/* Returns 0 upon success, a negative number upon errors. */
 int ft2232_spi_init(void)
 {
-	int f;
+	int f, ret = 0;
    struct ftdi_context *ftdic = &ftdic_context;
    unsigned char buf[512];
    int ft2232_vid = FTDI_VID;
@@ -195,7 +196,7 @@
    	} else {
    		msg_perr("Error: Invalid device type specified.\n");
    		free(arg);
-			return 1;
+			return -1;
    	}
    }
    free(arg);
@@ -211,7 +212,7 @@
    	default:
    		msg_perr("Error: Invalid port/interface specified.\n");
    		free(arg);
-			return 1;
+			return -2;
    	}
    }
    free(arg);
@@ -223,7 +224,7 @@

if (ftdi_init(ftdic) < 0) {
    	msg_perr("ftdi_init failed\n");
-		return EXIT_FAILURE; // TODO
+		return -3;
    }

f = ftdi_usb_open(ftdic, ft2232_vid, ft2232_type);
@@ -231,7 +232,7 @@
    if (f < 0 && f != -5) {
    	msg_perr("Unable to open FTDI device: %d (%s)\n", f,
    			ftdi_get_error_string(ftdic));
-		exit(-1); // TODO
+		return -4;
    }

if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H) {
@@ -264,8 +265,10 @@
    if (clock_5x) {
    	msg_pdbg("Disable divide-by-5 front stage\n");
    	buf[0] = 0x8a;		/* Disable divide-by-5. */
-		if (send_buf(ftdic, buf, 1))
-			return -1;
+		if (send_buf(ftdic, buf, 1)) {
+			ret = -5;
+			goto ftdi_err;
+		}
    	mpsse_clk = 60.0;
    } else {
    	mpsse_clk = 12.0;
@@ -276,8 +279,10 @@
    /* valueL/valueH are (desired_divisor - 1) */
    buf[1] = (DIVIDE_BY - 1) & 0xff;
    buf[2] = ((DIVIDE_BY - 1) >> 8) & 0xff;
-	if (send_buf(ftdic, buf, 3))
-		return -1;
+	if (send_buf(ftdic, buf, 3)) {
+		ret = -6;
+		goto ftdi_err;
+	}

msg_pdbg("MPSSE clock: %f MHz divisor: %d "
    	 "SPI clock: %f MHz\n",
@@ -287,23 +292,36 @@
    /* Disconnect TDI/DO to TDO/DI for loopback. */
    msg_pdbg("No loopback of TDI/DO TDO/DI\n");
    buf[0] = 0x85;
-	if (send_buf(ftdic, buf, 1))
-		return -1;
+	if (send_buf(ftdic, buf, 1)) {
+		ret = -7;
+		goto ftdi_err;
+	}

msg_pdbg("Set data bits\n");
    buf[0] = SET_BITS_LOW;
    buf[1] = cs_bits;
    buf[2] = pindir;
-	if (send_buf(ftdic, buf, 3))
-		return -1;
+	if (send_buf(ftdic, buf, 3)) {
+		ret = -8;
+		goto ftdi_err;
+	}

// msg_pdbg("\nft2232 chosen\n");

register_spi_programmer(&spi_programmer_ft2232);

return 0;
+
+ftdi_err:
+	if ((f = ftdi_usb_close(ftdic)) < 0) {
+		msg_perr("Unable to close FTDI device: %d (%s)\n", f,
+		         ftdi_get_error_string(ftdic));
+	}
+
+	return ret;
 }

+/* Returns 0 upon success, a negative number upon errors. */
 static int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt,
    	const unsigned char *writearr, unsigned char *readarr)
 {
@@ -324,7 +342,8 @@
    	buf = realloc(buf, bufsize);
    	if (!buf) {
    		msg_perr("Out of memory!\n");
-			exit(1);
+			/* TODO: What to do with buf? */
+			return SPI_GENERIC_ERROR;
    	}
    	oldbufsize = bufsize;
    }