Author: hailfinger Date: 2009-08-19 01:51:22 +0200 (Wed, 19 Aug 2009) New Revision: 689
Modified: trunk/flashrom.8 Log: Add serprog documentation to the manpage.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/flashrom.8 =================================================================== --- trunk/flashrom.8 2009-08-18 23:50:14 UTC (rev 688) +++ trunk/flashrom.8 2009-08-18 23:51:22 UTC (rev 689) @@ -146,6 +146,8 @@ .sp .BR "* ft2232spi" " (for flash ROMs attached to a FT2232H/FT4232H based USB SPI programmer)" .sp +.BR "* serprog" " (for flash ROMs attached to Urja's AVR programmer)" +.sp The dummy programmer has an optional parameter specifying the bus types it should support. For that you have to use the .B "flashrom -p dummy=type" @@ -178,16 +180,16 @@ .BR nic3com , .BR satasii . .sp -The it87spi has an optional parameter which will set the I/O base port of the -IT87* SPI controller interface to the port specified in the parameter. -For that you have to use the +The it87spi programmer has an optional parameter which will set the I/O base +port of the IT87* SPI controller interface to the port specified in the +parameter. For that you have to use the .B "flashrom -p it87spi=port=portnum" syntax where .B portnum is an I/O port number which must be a multiple of 8. .sp -The ft2232spi has an optional parameter specifying the controller type and -interface/port it should support. For that you have to use the +The ft2232spi programmer has an optional parameter specifying the controller +type and interface/port it should support. For that you have to use the .B "flashrom -p ft2232spi=model,port=interface" syntax where .B model @@ -202,6 +204,19 @@ .B 4232H and the default interface is .BR B . +.sp +The serprog programmer has an optional parameter specifying either a serial +device/baud combination or an IP/port combination for communication with the +programmer. For serial, you have to use the +.B "flashrom -p serprog=/dev/device:baud" +syntax and for IP, you have to use +.B "flashrom -p serprog=ip:port" +instead. More information about serprog is available in serprog-protocol.txt in +the source distribution. +.sp +Support for some programmers can be disabled at compile time. +.B "flashrom -h" +lists all supported programmers. .TP .B "-h, --help" Show a help text and exit.