Hello Carl-Daniel!
Sorry for not getting to this sooner. I never got your e-mail yesterday because of the Gmail crash and I just got back home from work. See my answers below.
On Tue, Sep 1, 2009 at 9:43 PM, Carl-Daniel Hailfingerc-d.hailfinger.devel.2006@gmx.net wrote:
Hi Davíð,
On 01.09.2009 20:39, Davíð Þór Þórarinsson wrote:
Some interesting facts: The chipset in this product is not on your list of supported chipsets, nor is the motherboard found on your list of supported motherboards. the chipset according to the manual is North Bridge: AMD770, South Bridge: AMD SB710.
We list everything in the SB700 family (SB700/SB710/SB750) as SB700. I have sent a patch to fix this and we'll commit it soon.
And it worked like a charm!
Glad to hear. We'll add your board to the list of working boards. It would be nice if you could reply-all to this mail with the output from lspci -nnvvvxxx
The lspci output is found at the end of the mail (below)
During the flash update, both the motherboard and chipset were wrongly identified. Here is the output from the operation:
flashrom v0.9.0-r631 No coreboot table found Found Chipset "AMD SB700", enabling flash write... OK Found board "GIGABYTE GA-MA78GM-S2H", enabling flash write... FAILED!
Hmmm. The Gigabyte board mismatch problem... we can't fix the problem due to nonstandard PCI settings on these boards, but we can hide it.
Would you mind downloading and compiling the latest flashrom version? You can get it either from our subversion repository at svn://coreboot.org/flashrom/trunk or a current snapshot from http://qa.coreboot.org/snapshots/ The output of latest flashrom -V would be appreciated as well so I can check the effect of some recent changes on your board.
Sure thing. I downloaded the 0.9.1-r709 version from the snapshots but I am unable to get it to compile properly. Any idea what it could be? Here is the output:
davidt@newthor:/tmp/flashrom-0.9.1-r709$ make Checking for a C compiler... found. Checking for pciutils and zlib... found. Checking for FTDI support... not found. cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o chipset_enable.o -c chipset_enable.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o board_enable.o -c board_enable.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o udelay.o -c udelay.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o jedec.o -c jedec.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o stm50flw0x0x.o -c stm50flw0x0x.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst28sf040.o -c sst28sf040.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o am29f040b.o -c am29f040b.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o mx29f002.o -c mx29f002.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o m29f400bt.o -c m29f400bt.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o pm29f002.o -c pm29f002.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o w49f002u.o -c w49f002u.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o 82802ab.o -c 82802ab.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o pm49fl00x.o -c pm49fl00x.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lf040.o -c sst49lf040.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o en29f002a.o -c en29f002a.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst49lfxxxc.o -c sst49lfxxxc.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o sst_fwhub.o -c sst_fwhub.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o layout.o -c layout.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o cbtable.o -c cbtable.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o flashchips.o -c flashchips.c cc -Os -Wall -Werror -D'SERPROG_SUPPORT=1' -D'FLASHROM_VERSION="0.9.1-r709"' -o physmap.o -c physmap.c cc1: warnings being treated as errors physmap.c: In function ‘rdmsr’: physmap.c:146: error: dereferencing type-punned pointer will break strict-aliasing rules make: *** [physmap.o] Error 1
Best regards,
/David
lspci output:
00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00: 02 10 57 59 06 00 30 22 00 00 00 06 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 57 59 30: 00 00 00 00 c4 00 00 00 00 00 00 00 00 00 00 00
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fa000000-fcffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 78 59 07 04 10 00 00 00 04 06 01 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 e1 e1 00 00 20: 00 fa f0 fc 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 08 00
00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 7f 59 07 04 10 00 00 00 04 06 01 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 d1 d1 00 00 20: c0 fd c0 fd f1 fd f1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00: 02 10 91 43 07 00 30 02 00 01 06 01 00 20 00 00 10: 01 ff 00 00 01 fe 00 00 01 fd 00 00 01 fc 00 00 20: 01 fb 00 00 00 f0 02 fe 00 00 00 00 58 14 02 b0 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00 10: 00 d0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00 10: 00 c0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 c0 00 00 00 00 00 00 00 04 02 00 00
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 97 43 06 00 a0 02 00 10 03 0c 01 20 80 00 10: 00 b0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 98 43 07 00 a0 02 00 10 03 0c 01 20 00 00 10: 00 a0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00: 02 10 96 43 16 00 b0 02 00 20 03 0c 10 20 00 00 10: 00 90 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 c0 00 00 00 00 00 00 00 03 02 00 00
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: Giga-byte Technology Device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied> Kernel modules: i2c-piix4 00: 02 10 85 43 03 04 30 02 3c 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 85 43 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00: 02 10 9c 43 05 00 30 02 00 8a 01 01 00 20 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: 01 fa 00 00 00 00 00 00 00 00 00 00 58 14 02 50 30: 00 00 00 00 70 00 00 00 00 00 00 00 ff 01 00 00
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Giga-byte Technology Device [1458:a022] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: 02 10 83 43 06 00 10 04 00 00 03 04 01 20 00 00 10: 04 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 22 a0 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 00 00 00
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 00: 02 10 9d 43 0f 00 20 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 9d 43 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdd00000-fddfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 c0 c0 80 22 20: e0 fd e0 fd d0 fd d0 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 02 10 99 43 06 00 a0 02 00 10 03 0c 01 20 00 00 10: 00 80 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: amd64_edac_mod 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:00.0 VGA compatible controller [0300]: nVidia Corporation G73 [GeForce 7600 GT] [10de:0391] (rev a1) Subsystem: Giga-byte Technology Device [1458:3417] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M] Region 5: I/O ports at ef00 [size=128] [virtual] Expansion ROM at fc000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00 10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 fb 20: 00 00 00 00 01 ef 00 00 00 00 00 00 58 14 17 34 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fdf00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 00: ec 10 68 81 07 04 10 00 02 00 00 02 10 00 00 00 10: 01 de 00 00 00 00 00 00 0c f0 ff fd 00 00 00 00 20: 0c 00 fe fd 00 00 00 00 00 00 00 00 58 14 00 e0 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
03:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fddff000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: bttv Kernel modules: bttv 00: 9e 10 6e 03 06 00 90 02 11 00 00 04 00 20 80 00 10: 08 f0 df fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 10 28
03:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Subsystem: Pinnacle Systems, Inc. (Wrong ID) Device [bd11:1200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fddfe000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: Bt87x Kernel modules: snd-bt87x 00: 9e 10 78 08 06 00 90 02 11 00 80 04 00 20 80 00 10: 08 e0 df fd 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 11 bd 00 12 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 04 ff
03:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10) Subsystem: Giga-byte Technology Device [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 00: 4c 10 24 80 06 00 10 02 00 10 00 0c 01 20 00 00 10: 00 f0 ef fd 00 80 ef fd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 10 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04