Re: [flashrom] PID ID for TUMPA Lite Edition in FT2232

[Stefan Tauner]

On Fri, 24 Jan 2014 15:01:40 +0100
Jadran Puharic  wrote:
> I have a TUMPA Lite edition it is FTDI Based Board similar to TUMPA/FT232H, but single channel:
> http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User%27s_Manu...
>
> You can build one from upper link, or buy cheap on ebay.
>
> And I added this to ft2232_spi.c
>
> --- ../flashrom/ft2232_spi.c	2013-09-17 19:43:16.000000000 +0200
> +++ ft2232_spi.c	2014-01-24 11:57:49.000000000 +0100
> @@ -43,6 +43,7 @@
>  #define FTDI_FT4232H_PID	0x6011
>  #define FTDI_FT232H_PID		0x6014
>  #define TIAO_TUMPA_PID		0x8a98
> +#define TIAO_TUMPA_LITE_PID   0x8a99
>  #define AMONTEC_JTAGKEY_PID	0xCFF8
>
> #define GOEPEL_VID		0x096C
> @@ -62,6 +63,7 @@
>    {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"},
>    {FTDI_VID, FTDI_FT232H_PID, OK, "FTDI", "FT232H"},
>    {FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"},
>    {FTDI_VID, TIAO_TUMPA_LITE_PID, OK, "TIAO", "USB Multi-Protocol Adapter Lite"},
> {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"},
>  {GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"},
>  {FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"},
>
> @@ -208,6 +210,10 @@
>    		/* Interface A is SPI1, B is SPI2. */
>    		ft2232_type = TIAO_TUMPA_PID;
>    		channel_count = 2;
> } else if (!strcasecmp(arg, "tumpalite")) {
> 	/* Only one channel is used on lite edition */
> 	ft2232_type = TIAO_TUMPA_LITE_PID;
> 	channel_count = 1;
> } else if (!strcasecmp(arg, "busblaster")) {
> 	/* In its default configuration it is a jtagkey clone */
> 	ft2232_type = FTDI_FT2232H_PID;
>
> works as advertised.

Hello Jadran,

thanks for your patch.
It is missing a proper signed-off tag though (see
http://www.coreboot.org/Development_Guidelines#Sign-off_Procedure) and
since I had to correct the whitespace and add documentation myself
anyway, I will commit it with my own sign-off. I hope you don't mind.