Hi, Thanks for posting the verbose output. It looks like the device ID bytes are showing up inconsistently - Sometimes probe_spi_rdid_generic shows 0x4011 and sometimes 0x4015.
Often this indicates that your connection is bad or you are running the programmer too fast. The output also shows: MPSSE clock: 60.000000 MHz, divisor: 2, SPI clock: 30.000000 MHz
Try increasing the divisor value by passing it on the command-line as a programmer parameter, e.g. `./flashrom -p ft2232_spi:type=232H,port=A,divisor=16 -r dump.rom -V`
On Tue, Jan 8, 2019 at 4:30 AM iafdan iafdan@gmail.com wrote:
Hi to the cool guys from Flashrom!
I'm trying to dump the contents of a Winbond W25Q16 using the command: ./flashrom -p ft2232_spi:type=232H,port=A -c W25Q16 -r dump.rom
I'm getting an error that: This flash part has status NOT WORKING for operations...
However, when I do "flashrom -L" the W25Q16 chip, with the exact same ID appears on the list.
Here's a verbose output: https://paste.flashrom.org/view.php?id=3163
I also tried reading the chip without specifying the exact chip.
Many thanks!!
flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org