Re: [flashrom] [PATCH] Add pinout for ByteBlaster to rayer_spi.c.

Thank you.

Subject: [PATCH] Add pinout for Atmel STK200/300 to rayer_spi.c.

Signed-off-by: Maksim Kuleshov 
---
 rayer_spi.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/rayer_spi.c b/rayer_spi.c
index 488b555..45b0067 100644
--- a/rayer_spi.c
+++ b/rayer_spi.c
@@ -40,6 +40,8 @@

static void rayer_byteblaster_preinit(void *);
 static int rayer_byteblaster_shutdown(void *);
+static void rayer_stk200_preinit(void *);
+static int rayer_stk200_shutdown(void *);

static struct s_rayer_pinout {
    const char * name;
@@ -54,6 +56,8 @@ static struct s_rayer_pinout {
    {"rayer","RayeR SPIPGM",5,6,7,6},
    {"xilinx","Xilinx Parallel Cable III (DLC 5)",2,1,0,4},
    {"byteblaster","Altera ByteBlaster",1,0,6,7,rayer_byteblaster_preinit,rayer_byteblaster_shutdown},
+	//url="http://real.kiev.ua/old/avreal/en/adapters.html#STK"
+	{"stk200", "Atmel STK200/300 adapter", 7, 4, 5, 6, rayer_stk200_preinit, rayer_stk200_shutdown},
    {0},
 };

@@ -212,6 +216,18 @@ static int rayer_byteblaster_shutdown(void * data){
    return 0;
 }

+static void rayer_stk200_preinit(void *data) {
+	msg_pdbg("stk200_init\n");
+	lpt_outbyte = (1 << 6) ; //clear #EN signals, set LED signal
+	OUTB(lpt_outbyte, lpt_iobase);
+}
+
+static int rayer_stk200_shutdown(void *data) {
+	msg_pdbg("stk200_shutdown\n");
+	lpt_outbyte = (1 << 2) | (1 << 3) ; //set #EN signals, clear LED signal
+	OUTB(lpt_outbyte, lpt_iobase);
+	return 0;
+}
 #else
 #error PCI port I/O access is not supported on this architecture yet.
 #endif