Only report :-)
*-core description: Motherboard product: G33-DS3R vendor: Gigabyte Technology Co., Ltd. physical id: 0 version: x.x *-firmware description: BIOS vendor: Award Software International, Inc. physical id: 0 version: F2 (04/19/2007) size: 128KB capacity: 960KB capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
pk25.com:/backup# flashrom -w G33DS3R.F7l flashrom v0.9.2-r1141 on Linux 2.6.36.101109 (i686), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. No coreboot table found. Found ITE Super I/O, id 8718 Found chipset "Intel ICH9R", enabling flash write... OK. This chipset supports the following protocols: FWH,SPI. Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... spi_block_erase_20 failed during command execution at address 0x0 spi_block_erase_52 failed during command execution at address 0x0 SUCCESS. done. Programming flash... done. COMPLETE. Verifying flash... VERIFIED. pk25.com:/backup# reboot Broadcast message from root@servidor1 (tty1) (Thu Dec 30 19:09:06 2010):
The system is going down for reboot NOW!
description: Desktop Computer product: G33-DS3R vendor: Gigabyte Technology Co., Ltd. width: 32 bits capabilities: smbios-2.4 dmi-2.4 configuration: boot=normal chassis=desktop uuid=00000000-0000-0000-0000-001A4D4816E7 *-core description: Motherboard product: G33-DS3R vendor: Gigabyte Technology Co., Ltd. physical id: 0 *-firmware description: BIOS vendor: Award Software International, Inc. physical id: 0 version: F7L (07/31/2009) size: 128KB capacity: 960KB capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
I reboot the bios and check (all settings are the same)... :-D
This upgrade all: (this is the log of upgrade bios)..
Update latest onboard VGA BIOS & AHCI ROM (yes de AHCI ROM was updated).
Thanks the software runs great..
regards!
======================================================================================= Hombre prevenido vale por dos. =======================================================================================