flashrom.exe -p ft2232_spi:type=arm-usb-tiny-h - E flashrom v0.9.6.1-r1704 on Windows 6.1 (x86) flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ft2232_spi. Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, Found=0xe 5, failed byte count from 0x00000000-0x00000fff: 0x9ca ERASE FAILED! Reading current flash chip contents... done. FAILED at 0x00008000! Expected=0xff , Found=0x85, failed byte count from 0x00008000-0x0000ffff: 0x4bb9 ERASE FAILED! Reading current flash chip contents... done. FAILED at 0x00008000! Expected=0xff , Found=0x85, failed byte count from 0x00000000-0x0000ffff: 0x4cb2 ERASE FAILED! Reading current flash chip contents... done. FAILED at 0x00050200! Expected=0xff , Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x30e ERASE FAILED! Reading current flash chip contents... done. FAILED at 0x002e9800! Expected=0xff , Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x700 ERASE FAILED! FAILED! Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks!