Hi
I used the flashrom with SB ICH9R and flash chip SST SST25VF016B, and
the descriptor mode is activated. The software version is flashrom-0.9.1
and pciutils-3.1.4. I failed to flash the BIOS. Please refer to the messages:
===========================
DiskStation> ./flashrom -E
flashrom v0.9.1-r710
No coreboot table found.
Found chipset "Intel ICH9R", enabling flash write... OK.
This chipset supports the following protocols: LPC,FWH,SPI.
Calibrating delay loop... OK.
Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000.
Erasing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x001fffff: 0x3000
ERASE FAILED!
FAILED!
ERROR at 0x00000000: Expected=0xff, Read=0x00
Your flash chip is in an unknown state.
Get help on IRC at irc.freenode.net channel #flashrom or
mail flashrom@flashrom.org
------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!
===========================
BTW, please find the "flashrom -E -V" messages in the attachment.
Do you know how to solve this problem ? Thanks for your help.
Eugene