Hi Javier,
On Wed 19 Apr 23, 01:32, Javier Bizcocho wrote:
Hello guys,
Just a soft bump.
No one has any comment about this? :).
So if what you're trying to do is to flash from the live system running on said motherboard, you probably need some kind of board enable code to allow write/erase access. See https://www.flashrom.org/Board_Enable
This can be as trivial as toggling a GPIO, but the less trivial part is usually to find out which GPIO that is.
Quoting the datasheet for the chip about security: ``` – Hardware Write Protect pins for block protection – Register-based Read and Write Protection – Individual Lock Register for each 4 KByte sector ```
So you might want to take a look at the status of the two latter points as well.
Cheers,
Paul
Kind Regards,
Javi.
On 17/04/2023 14:34, Javier Bizcocho wrote:
Hello guys,
I'm trying to flash a modded bios on my motherboard. The computer is a Dell SC1435 and the flash chip in question "M50FLW080A" is supported by the tool already, but just partially.
It looks like it can read the bios, but when reading or erasing it always fails (and every now and then it even forces my PC to reboot). My server is running FreeBSD 13.1, but I've also tried with Ubuntu (same result). Even though it fails to erase / write the chip was never altered at all, so I wonder if there is any kind of protection on it.
Is there any logs that I can extract from the tool itself? I'd like to avoid the need to de-soldering the chip in order to flash it :).
Any thoughts?
Thank you in advance,
Javi.
flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-leave@flashrom.org