Hello again,
Am 17.06.2010 um 16:00 schrieb Carl-Daniel Hailfinger:
Side note: My AAI patch on the list might result in a faster write if you change the write function for your chip in flashchips.c. It does not support progres printing, though, so you might want to wait for an updated progress printing patch.
I think I will wait for a combination of the AAI patch + Progress bar + 3x BP-Speedpatch.
I think I read somewhere on dangerousprototypes.com that OpenOCD support was broken in some firmware versions. We use essentially the same interface. Anyway, I reported your problem here: http://dangerousprototypes.com/forum/index.php?topic=651.0
So they suggest to send a dummy spi command first and then start. Thats a quick and dirty workaround. Shall I hang in a Logic Analyzer between the Bus-Pirate and the spi-flash to figure out the communication exactly ?
By the way: The flashing yesterday was not only sucessfull, Bus-Pirate and Flashrom saved my bricked T3H6 mainboard and the pc is running perfectly again. Thanks for all the support on this.
And I heard through the grapevine that a pirate in a bus is driving to Tübingen somewhere in the next 2-3 weeks ;-)
Cheers,
Daniel