Dear Yuri,
please always reply to the list and use interleaved quoting style [3]. I put your address into CC not being sure if you are following the list.
Am Dienstag, den 31.05.2011, 13:22 +0400 schrieb Yura I:
Thaks for answer. I have compiled the latest version from snv. And got still same error:
Strange.
$ sudo flashrom -w P4P81019.rom flashrom v0.9.3-r1322 on Linux 2.6.32-32-generic-pae (i686), built with libpci 3.0.0, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. This chipset supports the following protocols: FWH. WARNING: Your mainboard is ASUS P4P800, but the mainboard-specific code has not been tested, and thus will not be executed by default. Depending on your hardware environment, erasing, writing or even probing can fail without running the board specific code.
Please see the man page (section PROGRAMMER SPECIFIC INFO, subsection "internal programmer") for details. Found chip "SST SST49LF004A/B" (512 kB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Erasing and writing flash chip... ERASE FAILED at 0x00000ae8! Expected=0xff, Read=0x44, failed byte count from 0x00000000-0x00000fff: 0x4fb ERASE FAILED! ERASE FAILED at 0x00000ae8! Expected=0xff, Read=0x44, failed byte count from 0x00000000-0x0000ffff: 0xf419 ERASE FAILED! Ошибка сегментирования
Last translated message is "Segmentation fault".
It should definitely not segfault. But this is where my knowledge stops and I have no time to look into this.
You should definitely join the IRC channel. I do not know how scared you are but probably nothing fatal happened since no write was allowed or took place. But you should wait for the experts to tell you what to do.
Thanks,
Paul